m/grafX2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
grafX2/src/miscfileformats.c
Thomas Bernard f53925f4f5 Load_CM5() : clean up palette setup
2018-03-05 13:55:35 +01:00

3850 lines
105 KiB
C
Raw Blame History

/* vim:expandtab:ts=2 sw=2:
*/
/* Grafx2 - The Ultimate 256-color bitmap paint program
Copyright 2011 Pawel Góralski
Copyright 2009 Petter Lindquist
Copyright 2008 Yves Rizoud
Copyright 2008 Franck Charlet
Copyright 2007-2011 Adrien Destugues
Copyright 1996-2001 Sunset Design (Guillaume Dorme & Karl Maritaud)
Grafx2 is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; version 2
of the License.
Grafx2 is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grafx2; if not, see <http://www.gnu.org/licenses/>
*/
///@file miscfileformats.c
/// Formats that aren't fully saving, either because of palette restrictions or other things
#include <limits.h>
#include <stdlib.h>
#include <string.h>
#include "engine.h"
#include "errors.h"
#include "global.h"
#include "io.h"
#include "libraw2crtc.h"
#include "loadsave.h"
#include "misc.h"
#include "sdlscreen.h"
#include "struct.h"
#include "windows.h"
#include "oldies.h"
//////////////////////////////////// PAL ////////////////////////////////////
//
// -- Test wether a file is in PAL format --------------------------------
void Test_PAL(T_IO_Context * context)
{
char buffer[32];
FILE *file;
long file_size;
File_error = 1;
if ((file = Open_file_read(context)))
{
file_size = File_length_file(file);
// First check for GrafX2 legacy palette format. The simplest one, 768 bytes
// of RGB data. It is a raw dump of the T_Palette structure. There is no
// header at all, so we check for the file size.
if (file_size == sizeof(T_Palette))
File_error = 0;
else
{
// Bigger (or smaller ?) files may be in other formats. These have an
// header, so look for it.
fread(buffer, 1, 8, file);
if (strncmp(buffer,"JASC-PAL",8) == 0)
{
// JASC file format, used by Paint Shop Pro and GIMP. This is also the
// one used for saving, as it brings greater interoperability.
File_error = 0;
}
else if(strncmp(buffer,"RIFF", 4) == 0)
{
// Microsoft RIFF file
// This is a data container (similar to IFF). We only check the first
// chunk header, and give up if that's not a palette.
fseek(file, 8, SEEK_SET);
fread(buffer, 1, 8, file);
if (strncmp(buffer, "PAL data", 8) == 0)
{
File_error = 0;
}
}
}
fclose(file);
}
}
void Test_GPL(T_IO_Context * context)
{
char buffer[16];
FILE *file;
long file_size;
File_error = 1;
if ((file = Open_file_read(context)))
{
file_size = File_length_file(file);
if (file_size > 33) {
// minimum header length == 33
// "GIMP Palette" == 12
fread(buffer, 1, 12, file);
if (strncmp(buffer,"GIMP Palette",12) == 0)
File_error = 0;
}
}
fclose(file);
}
// skip the padding before a space-padded field.
static int skip_padding(FILE *file, int max_chars)
{
char buffer[1];
int chars_read = 0;
int latest_chars_read = 0;
size_t tmp;
buffer[0] = ' ';
while (buffer[0] == ' '){
latest_chars_read = fread(buffer, 1, 1, file);
if ((latest_chars_read != 1) || (chars_read == max_chars))
return chars_read; // eof
chars_read += latest_chars_read;
}
if (chars_read > 0){
tmp = ftell(file);
// printf ("rewinding to %d", tmp - 1);
fseek(file, tmp - 1, SEEK_SET);
}
return chars_read;
}
// -- Load file with format GPL -----------------------------------------
void Load_GPL(T_IO_Context * context)
{
FILE *file;
char filename[MAX_PATH_CHARACTERS]; // full filename
long pos;
File_error=0;
// Open file
if ((file=Open_file_read(context)))
{
fread(filename, 1, 13, file);
if (strncmp(filename,"GIMP Palette\n",13) == 0)
{
int i, j, r, g, b, columns, chars_read;
fscanf(file, "Name: %s\n", filename);
printf("DBG: Escaped nominal destruction ~%s~\n", filename); // y
fscanf(file, "Columns: %d\n", &columns);
// TODO: set grafx2 columns setting to match.
printf("DBG: Escaped architectural destruction %d\n", columns); // y
// #<newline>
fread(filename,1, 2, file);
filename[2] = 0;
printf("DBG: Escaped grammatical destruction ~%s~\n", filename);
for (i = 0; i < 256; i++)
{
pos = ftell(file);
skip_padding(file, 32);
fscanf(file, "%d", &r);
skip_padding(file, 32);
fscanf(file, "%d", &g);
skip_padding(file, 32);
fscanf(file, "%d\t", &b);
filename[0] = 0;
j = 0;
do {
chars_read = fscanf(file, "%s", filename+j);
if (chars_read > 0){
j += chars_read;
// space or newline follows.
fread(filename+j, 1, 1, file);
}
else{
filename[j] = '\n';
}
} while (filename[j] != '\n');
filename[j] = 0;
if (ftell(file) == pos)
break; // no more colors.
// TODO: analyze color names to build shade table
printf("DBG: %d: %s\n", i, filename);
context->Palette[i].R = r;
context->Palette[i].G = g;
context->Palette[i].B = b;
}
} else
File_error = 2;
// close the file
fclose(file);
}
else
// Si on n'a pas réussi à ouvrir le fichier, alors il y a eu une erreur
File_error=1;
}
void
Save_GPL (T_IO_Context * context)
{
// Gimp is a unix program, so use Unix file endings (LF aka '\n')
FILE *file;
File_error=0;
// Open output file
if ((file=Open_file_write(context)) != NULL ){
int i;
fprintf (file, "GIMP Palette\n");
fprintf (file, "Name: %s\n", context->File_name);
// TODO: use actual columns value
fprintf (file, "Columns: %d\n#\n", 16);
for (i = 0; i < 256 && File_error==0; i++)
{
// TODO: build names from shade table data
if (fprintf(file,"%d %d %d\tUntitled\n",context->Palette[i].R, context->Palette[i].G, context->Palette[i].B) <= 0)
File_error=1;
}
fclose(file);
if (File_error)
Remove_file(context);
}
else
{
// unable to open output file, nothing saved.
File_error=1;
}
}
// -- Lire un fichier au format PAL -----------------------------------------
void Load_PAL(T_IO_Context * context)
{
FILE *file; // Fichier du fichier
File_error=0;
// Ouverture du fichier
if ((file=Open_file_read(context)))
{
long file_size = File_length_file(file);
// Le fichier ne peut être au format PAL que si sa taille vaut 768 octets
if (file_size == sizeof(T_Palette))
{
T_Palette palette_64;
// Pre_load(context, ?); // Pas possible... pas d'image...
// Lecture du fichier dans context->Palette
if (Read_bytes(file, palette_64, sizeof(T_Palette)))
{
Palette_64_to_256(palette_64);
memcpy(context->Palette, palette_64, sizeof(T_Palette));
}
else
File_error = 2;
} else {
char buffer[16];
fread(buffer, 1, 8, file);
buffer[8] = '\0';
if (strncmp(buffer,"JASC-PAL",8) == 0)
{
int i, n, r, g, b;
fscanf(file, "%d",&n);
if(n != 100)
{
File_error = 2;
fclose(file);
return;
}
// Read color count
fscanf(file, "%d",&n);
for (i = 0; i < n; i++)
{
fscanf(file, "%d %d %d",&r, &g, &b);
context->Palette[i].R = r;
context->Palette[i].G = g;
context->Palette[i].B = b;
}
}
else if(strncmp(buffer, "RIFF", 4) == 0)
{
// Microsoft RIFF format.
fseek(file, 8, SEEK_SET);
fread(buffer, 1, 8, file);
if (strncmp(buffer, "PAL data", 8) == 0)
{
word color_count;
word i = 0;
fseek(file, 22, SEEK_SET);
Read_word_le(file, &color_count);
for(i = 0; i < color_count; i++)
{
Read_bytes(file, buffer, 4);
context->Palette[i].R = buffer[0];
context->Palette[i].G = buffer[1];
context->Palette[i].B = buffer[2];
}
} else File_error = 2;
} else
File_error = 2;
}
fclose(file);
}
else
// Si on n'a pas réussi à ouvrir le fichier, alors il y a eu une erreur
File_error=1;
}
// -- Sauver un fichier au format PAL ---------------------------------------
void Save_PAL(T_IO_Context * context)
{
// JASC-PAL is a DOS/Windows format, so use CRLF line endings "\r\n"
FILE *file;
File_error=0;
// Open output file
if ((file=Open_file_write(context)) != NULL)
{
int i;
setvbuf(file, NULL, _IOFBF, 64*1024);
if (fputs("JASC-PAL\r\n0100\r\n256\r\n", file)==EOF)
File_error=1;
for (i = 0; i < 256 && File_error==0; i++)
{
if (fprintf(file,"%d %d %d\r\n",context->Palette[i].R, context->Palette[i].G, context->Palette[i].B) <= 0)
File_error=1;
}
fclose(file);
if (File_error)
Remove_file(context);
}
else
{
// unable to open output file, nothing saved.
File_error=1;
}
}
//////////////////////////////////// PKM ////////////////////////////////////
typedef struct
{
char Ident[3]; // String "PKM" }
byte Method; // Compression method
// 0 = per-line compression (c)KM
// others = unknown at the moment
byte Recog1; // Recognition byte 1
byte Recog2; // Recognition byte 2
word Width; // Image width
word Height; // Image height
T_Palette Palette;// RGB Palette 256*3, on a 1-64 scale for each component
word Jump; // Size of the jump between header and image:
// Used to insert a comment
} T_PKM_Header;
// -- Tester si un fichier est au format PKM --------------------------------
void Test_PKM(T_IO_Context * context)
{
FILE *file; // Fichier du fichier
T_PKM_Header header;
File_error=1;
// Ouverture du fichier
if ((file=Open_file_read(context)))
{
// Lecture du header du fichier
if (Read_bytes(file,&header.Ident,3) &&
Read_byte(file,&header.Method) &&
Read_byte(file,&header.Recog1) &&
Read_byte(file,&header.Recog2) &&
Read_word_le(file,&header.Width) &&
Read_word_le(file,&header.Height) &&
Read_bytes(file,&header.Palette,sizeof(T_Palette)) &&
Read_word_le(file,&header.Jump))
{
// On regarde s'il y a la signature PKM suivie de la méthode 0.
// La constante "PKM" étant un chaîne, elle se termine toujours par 0.
// Donc pas la peine de s'emm...er à regarder si la méthode est à 0.
if ( (!memcmp(&header,"PKM",4)) && header.Width && header.Height)
File_error=0;
}
fclose(file);
}
}
// -- Lire un fichier au format PKM -----------------------------------------
void Load_PKM(T_IO_Context * context)
{
FILE *file; // Fichier du fichier
T_PKM_Header header;
byte color;
byte temp_byte;
word len;
word index;
dword Compteur_de_pixels;
dword Compteur_de_donnees_packees;
dword image_size;
dword Taille_pack;
long file_size;
File_error=0;
if ((file=Open_file_read(context)))
{
file_size=File_length_file(file);
if (Read_bytes(file,&header.Ident,3) &&
Read_byte(file,&header.Method) &&
Read_byte(file,&header.Recog1) &&
Read_byte(file,&header.Recog2) &&
Read_word_le(file,&header.Width) &&
Read_word_le(file,&header.Height) &&
Read_bytes(file,&header.Palette,sizeof(T_Palette)) &&
Read_word_le(file,&header.Jump))
{
context->Comment[0]='\0'; // On efface le commentaire
if (header.Jump)
{
index=0;
while ( (index<header.Jump) && (!File_error) )
{
if (Read_byte(file,&temp_byte))
{
index+=2; // On rajoute le "Field-id" et "le Field-size" pas encore lu
switch (temp_byte)
{
case 0 : // Commentaire
if (Read_byte(file,&temp_byte))
{
if (temp_byte>COMMENT_SIZE)
{
color=temp_byte; // On se sert de color comme
temp_byte=COMMENT_SIZE; // variable temporaire
color-=COMMENT_SIZE;
}
else
color=0;
if (Read_bytes(file,context->Comment,temp_byte))
{
index+=temp_byte;
context->Comment[temp_byte]='\0';
if (color)
if (fseek(file,color,SEEK_CUR))
File_error=2;
}
else
File_error=2;
}
else
File_error=2;
break;
case 1 : // Dimensions de l'écran d'origine
if (Read_byte(file,&temp_byte))
{
if (temp_byte==4)
{
index+=4;
if ( ! Read_word_le(file,(word *) &Original_screen_X)
|| !Read_word_le(file,(word *) &Original_screen_Y) )
File_error=2;
}
else
File_error=2;
}
else
File_error=2;
break;
case 2 : // color de transparence
if (Read_byte(file,&temp_byte))
{
if (temp_byte==1)
{
index++;
if (! Read_byte(file,&Back_color))
File_error=2;
}
else
File_error=2;
}
else
File_error=2;
break;
default:
if (Read_byte(file,&temp_byte))
{
index+=temp_byte;
if (fseek(file,temp_byte,SEEK_CUR))
File_error=2;
}
else
File_error=2;
}
}
else
File_error=2;
}
if ( (!File_error) && (index!=header.Jump) )
File_error=2;
}
/*Init_lecture();*/
if (!File_error)
{
Pre_load(context, header.Width,header.Height,file_size,FORMAT_PKM,PIXEL_SIMPLE,0);
if (File_error==0)
{
context->Width=header.Width;
context->Height=header.Height;
image_size=(dword)(context->Width*context->Height);
// Palette lue en 64
memcpy(context->Palette,header.Palette,sizeof(T_Palette));
Palette_64_to_256(context->Palette);
Compteur_de_donnees_packees=0;
Compteur_de_pixels=0;
// Header size is 780
Taille_pack=(file_size)-780-header.Jump;
// Boucle de décompression:
while ( (Compteur_de_pixels<image_size) && (Compteur_de_donnees_packees<Taille_pack) && (!File_error) )
{
if(Read_byte(file, &temp_byte)!=1)
{
File_error=2;
break;
}
// Si ce n'est pas un octet de reconnaissance, c'est un pixel brut
if ( (temp_byte!=header.Recog1) && (temp_byte!=header.Recog2) )
{
Set_pixel(context, Compteur_de_pixels % context->Width,
Compteur_de_pixels / context->Width,
temp_byte);
Compteur_de_donnees_packees++;
Compteur_de_pixels++;
}
else // Sinon, On regarde si on va décompacter un...
{ // ... nombre de pixels tenant sur un byte
if (temp_byte==header.Recog1)
{
if(Read_byte(file, &color)!=1)
{
File_error=2;
break;
}
if(Read_byte(file, &temp_byte)!=1)
{
File_error=2;
break;
}
for (index=0; index<temp_byte; index++)
Set_pixel(context, (Compteur_de_pixels+index) % context->Width,
(Compteur_de_pixels+index) / context->Width,
color);
Compteur_de_pixels+=temp_byte;
Compteur_de_donnees_packees+=3;
}
else // ... nombre de pixels tenant sur un word
{
if(Read_byte(file, &color)!=1)
{
File_error=2;
break;
}
Read_word_be(file, &len);
for (index=0; index<len; index++)
Set_pixel(context, (Compteur_de_pixels+index) % context->Width,
(Compteur_de_pixels+index) / context->Width,
color);
Compteur_de_pixels+=len;
Compteur_de_donnees_packees+=4;
}
}
}
}
}
/*Close_lecture();*/
}
else // Lecture header impossible: Error ne modifiant pas l'image
File_error=1;
fclose(file);
}
else // Ouv. fichier impossible: Error ne modifiant pas l'image
File_error=1;
}
// -- Sauver un fichier au format PKM ---------------------------------------
// Trouver quels sont les octets de reconnaissance
void Find_recog(byte * recog1, byte * recog2)
{
dword Find_recon[256]; // Table d'utilisation de couleurs
byte best; // Meilleure couleur pour recon (recon1 puis recon2)
dword NBest; // Nombre d'occurences de cette couleur
word index;
// On commence par compter l'utilisation de chaque couleurs
Count_used_colors(Find_recon);
// Ensuite recog1 devient celle la moins utilisée de celles-ci
*recog1=0;
best=1;
NBest=INT_MAX; // Une même couleur ne pourra jamais être utilisée 1M de fois.
for (index=1;index<=255;index++)
if (Find_recon[index]<NBest)
{
best=index;
NBest=Find_recon[index];
}
*recog1=best;
// Enfin recog2 devient la 2ème moins utilisée
*recog2=0;
best=0;
NBest=INT_MAX;
for (index=0;index<=255;index++)
if ( (Find_recon[index]<NBest) && (index!=*recog1) )
{
best=index;
NBest=Find_recon[index];
}
*recog2=best;
}
void Save_PKM(T_IO_Context * context)
{
FILE *file;
T_PKM_Header header;
dword Compteur_de_pixels;
dword image_size;
word repetitions;
byte last_color;
byte pixel_value;
byte comment_size;
// Construction du header
memcpy(header.Ident,"PKM",3);
header.Method=0;
Find_recog(&header.Recog1,&header.Recog2);
header.Width=context->Width;
header.Height=context->Height;
memcpy(header.Palette,context->Palette,sizeof(T_Palette));
Palette_256_to_64(header.Palette);
// Calcul de la taille du Post-header
header.Jump=9; // 6 pour les dimensions de l'ecran + 3 pour la back-color
comment_size=strlen(context->Comment);
if (comment_size)
header.Jump+=comment_size+2;
File_error=0;
// Ouverture du fichier
if ((file=Open_file_write(context)))
{
setvbuf(file, NULL, _IOFBF, 64*1024);
// Ecriture du header
if (Write_bytes(file,&header.Ident,3) &&
Write_byte(file,header.Method) &&
Write_byte(file,header.Recog1) &&
Write_byte(file,header.Recog2) &&
Write_word_le(file,header.Width) &&
Write_word_le(file,header.Height) &&
Write_bytes(file,&header.Palette,sizeof(T_Palette)) &&
Write_word_le(file,header.Jump))
{
// Ecriture du commentaire
// (Compteur_de_pixels est utilisé ici comme simple index de comptage)
if (comment_size)
{
Write_one_byte(file,0);
Write_one_byte(file,comment_size);
for (Compteur_de_pixels=0; Compteur_de_pixels<comment_size; Compteur_de_pixels++)
Write_one_byte(file,context->Comment[Compteur_de_pixels]);
}
// Ecriture des dimensions de l'écran
Write_one_byte(file,1);
Write_one_byte(file,4);
Write_one_byte(file,Screen_width&0xFF);
Write_one_byte(file,Screen_width>>8);
Write_one_byte(file,Screen_height&0xFF);
Write_one_byte(file,Screen_height>>8);
// Ecriture de la back-color
Write_one_byte(file,2);
Write_one_byte(file,1);
Write_one_byte(file,Back_color);
// Routine de compression PKM de l'image
image_size=(dword)(context->Width*context->Height);
Compteur_de_pixels=0;
pixel_value=Get_pixel(context, 0,0);
while ( (Compteur_de_pixels<image_size) && (!File_error) )
{
Compteur_de_pixels++;
repetitions=1;
last_color=pixel_value;
if(Compteur_de_pixels<image_size)
{
pixel_value=Get_pixel(context, Compteur_de_pixels % context->Width,Compteur_de_pixels / context->Width);
}
while ( (pixel_value==last_color)
&& (Compteur_de_pixels<image_size)
&& (repetitions<65535) )
{
Compteur_de_pixels++;
repetitions++;
if(Compteur_de_pixels>=image_size) break;
pixel_value=Get_pixel(context, Compteur_de_pixels % context->Width,Compteur_de_pixels / context->Width);
}
if ( (last_color!=header.Recog1) && (last_color!=header.Recog2) )
{
if (repetitions==1)
Write_one_byte(file,last_color);
else
if (repetitions==2)
{
Write_one_byte(file,last_color);
Write_one_byte(file,last_color);
}
else
if ( (repetitions>2) && (repetitions<256) )
{ // RECON1/couleur/nombre
Write_one_byte(file,header.Recog1);
Write_one_byte(file,last_color);
Write_one_byte(file,repetitions&0xFF);
}
else
if (repetitions>=256)
{ // RECON2/couleur/hi(nombre)/lo(nombre)
Write_one_byte(file,header.Recog2);
Write_one_byte(file,last_color);
Write_one_byte(file,repetitions>>8);
Write_one_byte(file,repetitions&0xFF);
}
}
else
{
if (repetitions<256)
{
Write_one_byte(file,header.Recog1);
Write_one_byte(file,last_color);
Write_one_byte(file,repetitions&0xFF);
}
else
{
Write_one_byte(file,header.Recog2);
Write_one_byte(file,last_color);
Write_one_byte(file,repetitions>>8);
Write_one_byte(file,repetitions&0xFF);
}
}
}
}
else
File_error=1;
fclose(file);
}
else
{
File_error=1;
fclose(file);
}
// S'il y a eu une erreur de sauvegarde, on ne va tout de même pas laisser
// ce fichier pourri traîner... Ca fait pas propre.
if (File_error)
Remove_file(context);
}
//////////////////////////////////// CEL ////////////////////////////////////
typedef struct
{
word Width; // width de l'image
word Height; // height de l'image
} T_CEL_Header1;
typedef struct
{
byte Signature[4]; // Signature du format
byte Kind; // Type de fichier ($10=PALette $20=BitMaP)
byte Nb_bits; // Nombre de bits
word Filler1; // ???
word Width; // width de l'image
word Height; // height de l'image
word X_offset; // Offset en X de l'image
word Y_offset; // Offset en Y de l'image
byte Filler2[16]; // ???
} T_CEL_Header2;
// -- Tester si un fichier est au format CEL --------------------------------
void Test_CEL(T_IO_Context * context)
{
int size;
FILE *file;
T_CEL_Header1 header1;
T_CEL_Header2 header2;
int file_size;
File_error=0;
if (! (file=Open_file_read(context)))
{
File_error = 1;
return;
}
file_size = File_length_file(file);
if (Read_word_le(file,&header1.Width) &&
Read_word_le(file,&header1.Height) )
{
// Vu que ce header n'a pas de signature, il va falloir tester la
// cohérence de la dimension de l'image avec celle du fichier.
size=file_size-4;
if ( (!size) || ( (((header1.Width+1)>>1)*header1.Height)!=size ) )
{
// Tentative de reconnaissance de la signature des nouveaux fichiers
fseek(file,0,SEEK_SET);
if (Read_bytes(file,&header2.Signature,4) &&
!memcmp(header2.Signature,"KiSS",4) &&
Read_byte(file,&header2.Kind) &&
(header2.Kind==0x20) &&
Read_byte(file,&header2.Nb_bits) &&
Read_word_le(file,&header2.Filler1) &&
Read_word_le(file,&header2.Width) &&
Read_word_le(file,&header2.Height) &&
Read_word_le(file,&header2.X_offset) &&
Read_word_le(file,&header2.Y_offset) &&
Read_bytes(file,&header2.Filler2,16))
{
// ok
}
else
File_error=1;
}
else
File_error=1;
}
else
{
File_error=1;
}
fclose(file);
}
// -- Lire un fichier au format CEL -----------------------------------------
void Load_CEL(T_IO_Context * context)
{
FILE *file;
T_CEL_Header1 header1;
T_CEL_Header2 header2;
short x_pos;
short y_pos;
byte last_byte=0;
long file_size;
const long int header_size = 4;
File_error=0;
if ((file=Open_file_read(context)))
{
if (Read_word_le(file,&(header1.Width))
&& Read_word_le(file,&(header1.Height)))
{
file_size=File_length_file(file);
if ( (file_size>header_size)
&& ( (((header1.Width+1)>>1)*header1.Height)==(file_size-header_size) ) )
{
// Chargement d'un fichier CEL sans signature (vieux fichiers)
context->Width=header1.Width;
context->Height=header1.Height;
Original_screen_X=context->Width;
Original_screen_Y=context->Height;
Pre_load(context, context->Width,context->Height,file_size,FORMAT_CEL,PIXEL_SIMPLE,0);
if (File_error==0)
{
// Chargement de l'image
/*Init_lecture();*/
for (y_pos=0;((y_pos<context->Height) && (!File_error));y_pos++)
for (x_pos=0;((x_pos<context->Width) && (!File_error));x_pos++)
if ((x_pos & 1)==0)
{
if(Read_byte(file,&last_byte)!=1) File_error = 2;
Set_pixel(context, x_pos,y_pos,(last_byte >> 4));
}
else
Set_pixel(context, x_pos,y_pos,(last_byte & 15));
/*Close_lecture();*/
}
}
else
{
// On réessaye avec le nouveau format
fseek(file,0,SEEK_SET);
if (Read_bytes(file,header2.Signature,4)
&& Read_byte(file,&(header2.Kind))
&& Read_byte(file,&(header2.Nb_bits))
&& Read_word_le(file,&(header2.Filler1))
&& Read_word_le(file,&(header2.Width))
&& Read_word_le(file,&(header2.Height))
&& Read_word_le(file,&(header2.X_offset))
&& Read_word_le(file,&(header2.Y_offset))
&& Read_bytes(file,header2.Filler2,16)
)
{
// Chargement d'un fichier CEL avec signature (nouveaux fichiers)
context->Width=header2.Width+header2.X_offset;
context->Height=header2.Height+header2.Y_offset;
Original_screen_X=context->Width;
Original_screen_Y=context->Height;
Pre_load(context, context->Width,context->Height,file_size,FORMAT_CEL,PIXEL_SIMPLE,0);
if (File_error==0)
{
// Chargement de l'image
/*Init_lecture();*/
if (!File_error)
{
// Effacement du décalage
for (y_pos=0;y_pos<header2.Y_offset;y_pos++)
for (x_pos=0;x_pos<context->Width;x_pos++)
Set_pixel(context, x_pos,y_pos,0);
for (y_pos=header2.Y_offset;y_pos<context->Height;y_pos++)
for (x_pos=0;x_pos<header2.X_offset;x_pos++)
Set_pixel(context, x_pos,y_pos,0);
switch(header2.Nb_bits)
{
case 4:
for (y_pos=0;((y_pos<header2.Height) && (!File_error));y_pos++)
for (x_pos=0;((x_pos<header2.Width) && (!File_error));x_pos++)
if ((x_pos & 1)==0)
{
if(Read_byte(file,&last_byte)!=1) File_error=2;
Set_pixel(context, x_pos+header2.X_offset,y_pos+header2.Y_offset,(last_byte >> 4));
}
else
Set_pixel(context, x_pos+header2.X_offset,y_pos+header2.Y_offset,(last_byte & 15));
break;
case 8:
for (y_pos=0;((y_pos<header2.Height) && (!File_error));y_pos++)
for (x_pos=0;((x_pos<header2.Width) && (!File_error));x_pos++)
{
byte byte_read;
if(Read_byte(file,&byte_read)!=1) File_error = 2;
Set_pixel(context, x_pos+header2.X_offset,y_pos+header2.Y_offset,byte_read);
}
break;
default:
File_error=1;
}
}
/*Close_lecture();*/
}
}
else
File_error=1;
}
fclose(file);
}
else
File_error=1;
}
else
File_error=1;
}
// -- Ecrire un fichier au format CEL ---------------------------------------
void Save_CEL(T_IO_Context * context)
{
FILE *file;
T_CEL_Header1 header1;
T_CEL_Header2 header2;
short x_pos;
short y_pos;
byte last_byte=0;
dword color_usage[256]; // Table d'utilisation de couleurs
// On commence par compter l'utilisation de chaque couleurs
Count_used_colors(color_usage);
File_error=0;
if ((file=Open_file_write(context)))
{
setvbuf(file, NULL, _IOFBF, 64*1024);
// On regarde si des couleurs >16 sont utilisées dans l'image
for (x_pos=16;((x_pos<256) && (!color_usage[x_pos]));x_pos++);
if (x_pos==256)
{
// Cas d'une image 16 couleurs (écriture à l'ancien format)
header1.Width =context->Width;
header1.Height=context->Height;
if (Write_word_le(file,header1.Width)
&& Write_word_le(file,header1.Height)
)
{
// Sauvegarde de l'image
for (y_pos=0;((y_pos<context->Height) && (!File_error));y_pos++)
{
for (x_pos=0;((x_pos<context->Width) && (!File_error));x_pos++)
if ((x_pos & 1)==0)
last_byte=(Get_pixel(context, x_pos,y_pos) << 4);
else
{
last_byte=last_byte | (Get_pixel(context, x_pos,y_pos) & 15);
Write_one_byte(file,last_byte);
}
if ((x_pos & 1)==1)
Write_one_byte(file,last_byte);
}
}
else
File_error=1;
fclose(file);
}
else
{
// Cas d'une image 256 couleurs (écriture au nouveau format)
// Recherche du décalage
for (y_pos=0;y_pos<context->Height;y_pos++)
{
for (x_pos=0;x_pos<context->Width;x_pos++)
if (Get_pixel(context, x_pos,y_pos)!=0)
break;
if (Get_pixel(context, x_pos,y_pos)!=0)
break;
}
header2.Y_offset=y_pos;
for (x_pos=0;x_pos<context->Width;x_pos++)
{
for (y_pos=0;y_pos<context->Height;y_pos++)
if (Get_pixel(context, x_pos,y_pos)!=0)
break;
if (Get_pixel(context, x_pos,y_pos)!=0)
break;
}
header2.X_offset=x_pos;
memcpy(header2.Signature,"KiSS",4); // Initialisation de la signature
header2.Kind=0x20; // Initialisation du type (BitMaP)
header2.Nb_bits=8; // Initialisation du nombre de bits
header2.Filler1=0; // Initialisation du filler 1 (?)
header2.Width=context->Width-header2.X_offset; // Initialisation de la largeur
header2.Height=context->Height-header2.Y_offset; // Initialisation de la hauteur
for (x_pos=0;x_pos<16;x_pos++) // Initialisation du filler 2 (?)
header2.Filler2[x_pos]=0;
if (Write_bytes(file,header2.Signature,4)
&& Write_byte(file,header2.Kind)
&& Write_byte(file,header2.Nb_bits)
&& Write_word_le(file,header2.Filler1)
&& Write_word_le(file,header2.Width)
&& Write_word_le(file,header2.Height)
&& Write_word_le(file,header2.X_offset)
&& Write_word_le(file,header2.Y_offset)
&& Write_bytes(file,header2.Filler2,14)
)
{
// Sauvegarde de l'image
for (y_pos=0;((y_pos<header2.Height) && (!File_error));y_pos++)
for (x_pos=0;((x_pos<header2.Width) && (!File_error));x_pos++)
Write_one_byte(file,Get_pixel(context, x_pos+header2.X_offset,y_pos+header2.Y_offset));
}
else
File_error=1;
fclose(file);
}
if (File_error)
Remove_file(context);
}
else
File_error=1;
}
//////////////////////////////////// KCF ////////////////////////////////////
typedef struct
{
struct
{
struct
{
byte Byte1;
byte Byte2;
} color[16];
} Palette[10];
} T_KCF_Header;
// -- Tester si un fichier est au format KCF --------------------------------
void Test_KCF(T_IO_Context * context)
{
FILE *file;
T_KCF_Header header1;
T_CEL_Header2 header2;
int pal_index;
int color_index;
File_error=0;
if ((file=Open_file_read(context)))
{
if (File_length_file(file)==320)
{
for (pal_index=0;pal_index<10 && !File_error;pal_index++)
for (color_index=0;color_index<16 && !File_error;color_index++)
if (!Read_byte(file,&header1.Palette[pal_index].color[color_index].Byte1) ||
!Read_byte(file,&header1.Palette[pal_index].color[color_index].Byte2))
File_error=1;
// On vérifie une propriété de la structure de palette:
for (pal_index=0;pal_index<10;pal_index++)
for (color_index=0;color_index<16;color_index++)
if ((header1.Palette[pal_index].color[color_index].Byte2>>4)!=0)
File_error=1;
}
else
{
if (Read_bytes(file,header2.Signature,4)
&& Read_byte(file,&(header2.Kind))
&& Read_byte(file,&(header2.Nb_bits))
&& Read_word_le(file,&(header2.Filler1))
&& Read_word_le(file,&(header2.Width))
&& Read_word_le(file,&(header2.Height))
&& Read_word_le(file,&(header2.X_offset))
&& Read_word_le(file,&(header2.Y_offset))
&& Read_bytes(file,header2.Filler2,14)
)
{
if (memcmp(header2.Signature,"KiSS",4)==0)
{
if (header2.Kind!=0x10)
File_error=1;
}
else
File_error=1;
}
else
File_error=1;
}
fclose(file);
}
else
File_error=1;
}
// -- Lire un fichier au format KCF -----------------------------------------
void Load_KCF(T_IO_Context * context)
{
FILE *file;
T_KCF_Header header1;
T_CEL_Header2 header2;
byte bytes[3];
int pal_index;
int color_index;
int index;
long file_size;
File_error=0;
if ((file=Open_file_read(context)))
{
file_size=File_length_file(file);
if (file_size==320)
{
// Fichier KCF à l'ancien format
for (pal_index=0;pal_index<10 && !File_error;pal_index++)
for (color_index=0;color_index<16 && !File_error;color_index++)
if (!Read_byte(file,&header1.Palette[pal_index].color[color_index].Byte1) ||
!Read_byte(file,&header1.Palette[pal_index].color[color_index].Byte2))
File_error=1;
if (!File_error)
{
// Pre_load(context, ?); // Pas possible... pas d'image...
if (Config.Clear_palette)
memset(context->Palette,0,sizeof(T_Palette));
// Chargement de la palette
for (pal_index=0;pal_index<10;pal_index++)
for (color_index=0;color_index<16;color_index++)
{
index=16+(pal_index*16)+color_index;
context->Palette[index].R=((header1.Palette[pal_index].color[color_index].Byte1 >> 4) << 4);
context->Palette[index].B=((header1.Palette[pal_index].color[color_index].Byte1 & 15) << 4);
context->Palette[index].G=((header1.Palette[pal_index].color[color_index].Byte2 & 15) << 4);
}
for (index=0;index<16;index++)
{
context->Palette[index].R=context->Palette[index+16].R;
context->Palette[index].G=context->Palette[index+16].G;
context->Palette[index].B=context->Palette[index+16].B;
}
}
else
File_error=1;
}
else
{
// Fichier KCF au nouveau format
if (Read_bytes(file,header2.Signature,4)
&& Read_byte(file,&(header2.Kind))
&& Read_byte(file,&(header2.Nb_bits))
&& Read_word_le(file,&(header2.Filler1))
&& Read_word_le(file,&(header2.Width))
&& Read_word_le(file,&(header2.Height))
&& Read_word_le(file,&(header2.X_offset))
&& Read_word_le(file,&(header2.Y_offset))
&& Read_bytes(file,header2.Filler2,14)
)
{
// Pre_load(context, ?); // Pas possible... pas d'image...
index=(header2.Nb_bits==12)?16:0;
for (pal_index=0;pal_index<header2.Height;pal_index++)
{
// Pour chaque palette
for (color_index=0;color_index<header2.Width;color_index++)
{
// Pour chaque couleur
switch(header2.Nb_bits)
{
case 12: // RRRR BBBB | 0000 VVVV
Read_bytes(file,bytes,2);
context->Palette[index].R=(bytes[0] >> 4) << 4;
context->Palette[index].B=(bytes[0] & 15) << 4;
context->Palette[index].G=(bytes[1] & 15) << 4;
break;
case 24: // RRRR RRRR | VVVV VVVV | BBBB BBBB
Read_bytes(file,bytes,3);
context->Palette[index].R=bytes[0];
context->Palette[index].G=bytes[1];
context->Palette[index].B=bytes[2];
}
index++;
}
}
if (header2.Nb_bits==12)
for (index=0;index<16;index++)
{
context->Palette[index].R=context->Palette[index+16].R;
context->Palette[index].G=context->Palette[index+16].G;
context->Palette[index].B=context->Palette[index+16].B;
}
}
else
File_error=1;
}
fclose(file);
}
else
File_error=1;
}
// -- Ecrire un fichier au format KCF ---------------------------------------
void Save_KCF(T_IO_Context * context)
{
FILE *file;
T_KCF_Header header1;
T_CEL_Header2 header2;
byte bytes[3];
int pal_index;
int color_index;
int index;
dword color_usage[256]; // Table d'utilisation de couleurs
// On commence par compter l'utilisation de chaque couleurs
Count_used_colors(color_usage);
File_error=0;
if ((file=Open_file_write(context)))
{
setvbuf(file, NULL, _IOFBF, 64*1024);
// Sauvegarde de la palette
// On regarde si des couleurs >16 sont utilisées dans l'image
for (index=16;((index<256) && (!color_usage[index]));index++);
if (index==256)
{
// Cas d'une image 16 couleurs (écriture à l'ancien format)
for (pal_index=0;pal_index<10;pal_index++)
for (color_index=0;color_index<16;color_index++)
{
index=16+(pal_index*16)+color_index;
header1.Palette[pal_index].color[color_index].Byte1=((context->Palette[index].R>>4)<<4) | (context->Palette[index].B>>4);
header1.Palette[pal_index].color[color_index].Byte2=context->Palette[index].G>>4;
}
// Write all
for (pal_index=0;pal_index<10 && !File_error;pal_index++)
for (color_index=0;color_index<16 && !File_error;color_index++)
if (!Write_byte(file,header1.Palette[pal_index].color[color_index].Byte1) ||
!Write_byte(file,header1.Palette[pal_index].color[color_index].Byte2))
File_error=1;
}
else
{
// Cas d'une image 256 couleurs (écriture au nouveau format)
memcpy(header2.Signature,"KiSS",4); // Initialisation de la signature
header2.Kind=0x10; // Initialisation du type (PALette)
header2.Nb_bits=24; // Initialisation du nombre de bits
header2.Filler1=0; // Initialisation du filler 1 (?)
header2.Width=256; // Initialisation du nombre de couleurs
header2.Height=1; // Initialisation du nombre de palettes
header2.X_offset=0; // Initialisation du décalage X
header2.Y_offset=0; // Initialisation du décalage Y
for (index=0;index<16;index++) // Initialisation du filler 2 (?)
header2.Filler2[index]=0;
if (!Write_bytes(file,header2.Signature,4)
|| !Write_byte(file,header2.Kind)
|| !Write_byte(file,header2.Nb_bits)
|| !Write_word_le(file,header2.Filler1)
|| !Write_word_le(file,header2.Width)
|| !Write_word_le(file,header2.Height)
|| !Write_word_le(file,header2.X_offset)
|| !Write_word_le(file,header2.Y_offset)
|| !Write_bytes(file,header2.Filler2,14)
)
File_error=1;
for (index=0;(index<256) && (!File_error);index++)
{
bytes[0]=context->Palette[index].R;
bytes[1]=context->Palette[index].G;
bytes[2]=context->Palette[index].B;
if (! Write_bytes(file,bytes,3))
File_error=1;
}
}
fclose(file);
if (File_error)
Remove_file(context);
}
else
File_error=1;
}
//////////////////////////////////// PI1 ////////////////////////////////////
//// DECODAGE d'une partie d'IMAGE ////
void PI1_8b_to_16p(byte * src,byte * dest)
{
int i; // index du pixel à calculer
word byte_mask; // Masque de decodage
word w0,w1,w2,w3; // Les 4 words bien ordonnés de la source
byte_mask=0x8000;
w0=(((word)src[0])<<8) | src[1];
w1=(((word)src[2])<<8) | src[3];
w2=(((word)src[4])<<8) | src[5];
w3=(((word)src[6])<<8) | src[7];
for (i=0;i<16;i++)
{
// Pour décoder le pixel n°i, il faut traiter les 4 words sur leur bit
// correspondant à celui du masque
dest[i]=((w0 & byte_mask)?0x01:0x00) |
((w1 & byte_mask)?0x02:0x00) |
((w2 & byte_mask)?0x04:0x00) |
((w3 & byte_mask)?0x08:0x00);
byte_mask>>=1;
}
}
//// CODAGE d'une partie d'IMAGE ////
void PI1_16p_to_8b(byte * src,byte * dest)
{
int i; // index du pixel à calculer
word byte_mask; // Masque de codage
word w0,w1,w2,w3; // Les 4 words bien ordonnés de la destination
byte_mask=0x8000;
w0=w1=w2=w3=0;
for (i=0;i<16;i++)
{
// Pour coder le pixel n°i, il faut modifier les 4 words sur leur bit
// correspondant à celui du masque
w0|=(src[i] & 0x01)?byte_mask:0x00;
w1|=(src[i] & 0x02)?byte_mask:0x00;
w2|=(src[i] & 0x04)?byte_mask:0x00;
w3|=(src[i] & 0x08)?byte_mask:0x00;
byte_mask>>=1;
}
dest[0]=w0 >> 8;
dest[1]=w0 & 0x00FF;
dest[2]=w1 >> 8;
dest[3]=w1 & 0x00FF;
dest[4]=w2 >> 8;
dest[5]=w2 & 0x00FF;
dest[6]=w3 >> 8;
dest[7]=w3 & 0x00FF;
}
//// DECODAGE de la PALETTE ////
void PI1_decode_palette(byte * src,byte * palette)
{
int i; // Numéro de la couleur traitée
int ip; // index dans la palette
word w; // Word contenant le code
// Schéma d'un word =
//
// Low High
// VVVV RRRR | 0000 BBBB
// 0321 0321 | 0321
ip=0;
for (i=0;i<16;i++)
{
#if SDL_BYTEORDER == SDL_LIL_ENDIAN
w=(((word)src[(i*2)+1]<<8) | (src[(i*2)+0]));
// Traitement des couleurs rouge, verte et bleue:
palette[ip++]=(((w & 0x0007) << 1) | ((w & 0x0008) >> 3)) << 4;
palette[ip++]=(((w & 0x7000) >> 11) | ((w & 0x8000) >> 15)) << 4;
palette[ip++]=(((w & 0x0700) >> 7) | ((w & 0x0800) >> 11)) << 4;
#else
w=(((word)src[(i*2+1)])|(((word)src[(i*2)])<<8));
palette[ip++] = (((w & 0x0700)>>7) | ((w & 0x0800) >> 7))<<4 ;
palette[ip++]=(((w & 0x0070)>>3) | ((w & 0x0080) >> 3))<<4 ;
palette[ip++] = (((w & 0x0007)<<1) | ((w & 0x0008)))<<4 ;
#endif
}
}
//// CODAGE de la PALETTE ////
void PI1_code_palette(byte * palette,byte * dest)
{
int i; // Numéro de la couleur traitée
int ip; // index dans la palette
word w; // Word contenant le code
// Schéma d'un word =
//
// Low High
// VVVV RRRR | 0000 BBBB
// 0321 0321 | 0321
ip=0;
for (i=0;i<16;i++)
{
#if SDL_BYTEORDER == SDL_LIL_ENDIAN
// Traitement des couleurs rouge, verte et bleue:
w =(((word)(palette[ip]>>2) & 0x38) >> 3) | (((word)(palette[ip]>>2) & 0x04) << 1); ip++;
w|=(((word)(palette[ip]>>2) & 0x38) << 9) | (((word)(palette[ip]>>2) & 0x04) << 13); ip++;
w|=(((word)(palette[ip]>>2) & 0x38) << 5) | (((word)(palette[ip]>>2) & 0x04) << 9); ip++;
dest[(i*2)+0]=w & 0x00FF;
dest[(i*2)+1]=(w>>8);
#else
w=(((word)(palette[ip]<<3))&0x0700);ip++;
w|=(((word)(palette[ip]>>1))&0x0070);ip++;
w|=(((word)(palette[ip]>>5))&0x0007);ip++;
dest[(i*2)+1]=w & 0x00FF;
dest[(i*2)+0]=(w>>8);
#endif
}
}
/// Load color ranges from a PI1 or PC1 image (Degas Elite format)
void PI1_load_ranges(T_IO_Context * context, const byte * buffer, int size)
{
int range;
if (buffer==NULL || size<32)
return;
for (range=0; range < 4; range ++)
{
word min_col, max_col, direction, delay;
min_col = (buffer[size - 32 + range*2 + 0] << 8) | buffer[size - 32 + range*2 + 1];
max_col = (buffer[size - 32 + range*2 + 8] << 8) | buffer[size - 32 + range*2 + 9];
direction = (buffer[size - 32 + range*2 + 16] << 8) | buffer[size - 32 + range*2 + 17];
delay = (buffer[size - 32 + range*2 + 24] << 8) | buffer[size - 32 + range*2 + 25];
if (max_col < min_col)
SWAP_WORDS(min_col,max_col)
// Sanity checks
if (min_col < 256 && max_col < 256 && direction < 3 && (direction == 1 || delay < 128))
{
int speed = 210/(128-delay);
// Grafx2's slider has a limit of 105
if (speed>105)
speed = 105;
context->Cycle_range[context->Color_cycles].Start=min_col;
context->Cycle_range[context->Color_cycles].End=max_col;
context->Cycle_range[context->Color_cycles].Inverse= (direction==0);
context->Cycle_range[context->Color_cycles].Speed=direction == 1 ? 0 : speed;
context->Color_cycles++;
}
}
}
/// Saves color ranges from a PI1 or PC1 image (Degas Elite format)
void PI1_save_ranges(T_IO_Context * context, byte * buffer, int size)
{
// empty by default
memset(buffer+size - 32, 0, 32);
if (context->Color_cycles)
{
int i; // index in context->Cycle_range[] : < context->Color_cycles
int saved_range; // index in resulting buffer : < 4
for (i=0, saved_range=0; i<context->Color_cycles && saved_range<4; i++)
{
if (context->Cycle_range[i].Start < 16 && context->Cycle_range[i].End < 16)
{
int speed;
if (context->Cycle_range[i].Speed == 0)
speed = 0;
else if (context->Cycle_range[i].Speed == 1)
// has to "round" manually to closest valid number for this format
speed = 1;
else
speed = 128 - 210 / context->Cycle_range[i].Speed;
buffer[size - 32 + saved_range*2 + 1] = context->Cycle_range[i].Start;
buffer[size - 32 + saved_range*2 + 9] = context->Cycle_range[i].End;
buffer[size - 32 + saved_range*2 + 17] = (context->Cycle_range[i].Speed == 0) ? 1 : (context->Cycle_range[i].Inverse ? 0 : 2);
buffer[size - 32 + saved_range*2 + 25] = speed;
saved_range ++;
}
}
}
}
// -- Tester si un fichier est au format PI1 --------------------------------
void Test_PI1(T_IO_Context * context)
{
FILE * file; // Fichier du fichier
int size; // Taille du fichier
word resolution; // Résolution de l'image
File_error=1;
// Ouverture du fichier
if ((file=Open_file_read(context)))
{
// Vérification de la taille
size=File_length_file(file);
if ((size==32034) || (size==32066))
{
// Lecture et vérification de la résolution
if (Read_word_le(file,&resolution))
{
if (resolution==0x0000)
File_error=0;
}
}
// Fermeture du fichier
fclose(file);
}
}
// -- Lire un fichier au format PI1 -----------------------------------------
void Load_PI1(T_IO_Context * context)
{
FILE *file;
word x_pos,y_pos;
byte * buffer;
byte * ptr;
byte pixels[320];
File_error=0;
if ((file=Open_file_read(context)))
{
// allocation d'un buffer mémoire
buffer=(byte *)malloc(32034);
if (buffer!=NULL)
{
// Lecture du fichier dans le buffer
if (Read_bytes(file,buffer,32034))
{
// Initialisation de la preview
Pre_load(context, 320,200,File_length_file(file),FORMAT_PI1,PIXEL_SIMPLE,4);
if (File_error==0)
{
// Initialisation de la palette
if (Config.Clear_palette)
memset(context->Palette,0,sizeof(T_Palette));
PI1_decode_palette(buffer+2,(byte *)context->Palette);
// Chargement/décompression de l'image
ptr=buffer+34;
for (y_pos=0;y_pos<200;y_pos++)
{
for (x_pos=0;x_pos<(320>>4);x_pos++)
{
PI1_8b_to_16p(ptr,pixels+(x_pos<<4));
ptr+=8;
}
for (x_pos=0;x_pos<320;x_pos++)
Set_pixel(context, x_pos,y_pos,pixels[x_pos]);
}
PI1_load_ranges(context, buffer, 32034);
}
}
else
File_error=1;
free(buffer);
buffer = NULL;
}
else
File_error=1;
fclose(file);
}
else
File_error=1;
}
// -- Sauver un fichier au format PI1 ---------------------------------------
void Save_PI1(T_IO_Context * context)
{
FILE *file;
short x_pos,y_pos;
byte * buffer;
byte * ptr;
byte pixels[320];
File_error=0;
// Ouverture du fichier
if ((file=Open_file_write(context)))
{
setvbuf(file, NULL, _IOFBF, 64*1024);
// allocation d'un buffer mémoire
buffer=(byte *)malloc(32034);
// Codage de la résolution
buffer[0]=0x00;
buffer[1]=0x00;
// Codage de la palette
PI1_code_palette((byte *)context->Palette,buffer+2);
// Codage de l'image
ptr=buffer+34;
for (y_pos=0;y_pos<200;y_pos++)
{
// Codage de la ligne
memset(pixels,0,320);
if (y_pos<context->Height)
{
for (x_pos=0;(x_pos<320) && (x_pos<context->Width);x_pos++)
pixels[x_pos]=Get_pixel(context, x_pos,y_pos);
}
for (x_pos=0;x_pos<(320>>4);x_pos++)
{
PI1_16p_to_8b(pixels+(x_pos<<4),ptr);
ptr+=8;
}
}
PI1_save_ranges(context, buffer, 32034);
if (Write_bytes(file,buffer,32034))
{
fclose(file);
}
else // Error d'écriture (disque plein ou protégé)
{
fclose(file);
Remove_file(context);
File_error=1;
}
// Libération du buffer mémoire
free(buffer);
buffer = NULL;
}
else
{
fclose(file);
Remove_file(context);
File_error=1;
}
}
//////////////////////////////////// PC1 ////////////////////////////////////
//// DECOMPRESSION d'un buffer selon la méthode PACKBITS ////
void PC1_uncompress_packbits(byte * src,byte * dest)
{
int is,id; // Les indices de parcour des buffers
int n; // Octet de contrôle
for (is=id=0;id<32000;)
{
n=src[is++];
if (n & 0x80)
{
// Recopier src[is] -n+1 fois
n=257-n;
for (;(n>0) && (id<32000);n--)
dest[id++]=src[is];
is++;
}
else
{
// Recopier n+1 octets littéralement
n=n+1;
for (;(n>0) && (id<32000);n--)
dest[id++]=src[is++];
}
// Contrôle des erreurs
if (n>0)
File_error=1;
}
}
//// COMPRESSION d'un buffer selon la méthode PACKBITS ////
void PC1_compress_packbits(byte * src,byte * dest,int source_size,int * dest_size)
{
*dest_size = 0;
while (source_size > 0)
{
int is = 0; // index dans la source
int id = 0; // index dans la destination
int ir; // index de la répétition
int n; // Taille des séquences
int repet; // "Il y a répétition"
while(is<40)
{
// On recherche le 1er endroit où il y a répétition d'au moins 3 valeurs
// identiques
repet=0;
for (ir=is;ir<40-2;ir++)
{
if ((src[ir]==src[ir+1]) && (src[ir+1]==src[ir+2]))
{
repet=1;
break;
}
}
// On code la partie sans répétitions
if (!repet || ir!=is)
{
n=(ir-is)+1;
dest[id++]=n-1;
for (;n>0;n--)
dest[id++]=src[is++];
}
// On code la partie sans répétitions
if (repet)
{
// On compte la quantité de fois qu'il faut répéter la valeur
for (ir+=3;ir<40;ir++)
{
if (src[ir]!=src[is])
break;
}
n=(ir-is);
dest[id++]=257-n;
dest[id++]=src[is];
is=ir;
}
}
// On renseigne la taille du buffer compressé
*dest_size+=id;
// Move for next 40-byte block
src += 40;
dest += id;
source_size -= 40;
}
}
//// DECODAGE d'une partie d'IMAGE ////
// Transformation de 4 plans de bits en 1 ligne de pixels
void PC1_4bp_to_1line(byte * src0,byte * src1,byte * src2,byte * src3,byte * dest)
{
int i,j; // Compteurs
int ip; // index du pixel à calculer
byte byte_mask; // Masque de decodage
byte b0,b1,b2,b3; // Les 4 octets des plans bits sources
ip=0;
// Pour chacun des 40 octets des plans de bits
for (i=0;i<40;i++)
{
b0=src0[i];
b1=src1[i];
b2=src2[i];
b3=src3[i];
// Pour chacun des 8 bits des octets
byte_mask=0x80;
for (j=0;j<8;j++)
{
dest[ip++]=((b0 & byte_mask)?0x01:0x00) |
((b1 & byte_mask)?0x02:0x00) |
((b2 & byte_mask)?0x04:0x00) |
((b3 & byte_mask)?0x08:0x00);
byte_mask>>=1;
}
}
}
//// CODAGE d'une partie d'IMAGE ////
// Transformation d'1 ligne de pixels en 4 plans de bits
void PC1_1line_to_4bp(byte * src,byte * dst0,byte * dst1,byte * dst2,byte * dst3)
{
int i,j; // Compteurs
int ip; // index du pixel à calculer
byte byte_mask; // Masque de decodage
byte b0,b1,b2,b3; // Les 4 octets des plans bits sources
ip=0;
// Pour chacun des 40 octets des plans de bits
for (i=0;i<40;i++)
{
// Pour chacun des 8 bits des octets
byte_mask=0x80;
b0=b1=b2=b3=0;
for (j=0;j<8;j++)
{
b0|=(src[ip] & 0x01)?byte_mask:0x00;
b1|=(src[ip] & 0x02)?byte_mask:0x00;
b2|=(src[ip] & 0x04)?byte_mask:0x00;
b3|=(src[ip] & 0x08)?byte_mask:0x00;
ip++;
byte_mask>>=1;
}
dst0[i]=b0;
dst1[i]=b1;
dst2[i]=b2;
dst3[i]=b3;
}
}
// -- Tester si un fichier est au format PC1 --------------------------------
void Test_PC1(T_IO_Context * context)
{
FILE *file; // Fichier du fichier
int size; // Taille du fichier
word resolution; // Résolution de l'image
File_error=1;
// Ouverture du fichier
if ((file=Open_file_read(context)))
{
// Vérification de la taille
size=File_length_file(file);
if ((size<=32066))
{
// Lecture et vérification de la résolution
if (Read_word_le(file,&resolution))
{
if (resolution==0x0080)
File_error=0;
}
}
// Fermeture du fichier
fclose(file);
}
}
// -- Lire un fichier au format PC1 -----------------------------------------
void Load_PC1(T_IO_Context * context)
{
FILE *file;
int size;
word x_pos,y_pos;
byte * buffercomp;
byte * bufferdecomp;
byte * ptr;
byte pixels[320];
File_error=0;
if ((file=Open_file_read(context)))
{
size=File_length_file(file);
// allocation des buffers mémoire
buffercomp=(byte *)malloc(size);
bufferdecomp=(byte *)malloc(32000);
if ( (buffercomp!=NULL) && (bufferdecomp!=NULL) )
{
// Lecture du fichier dans le buffer
if (Read_bytes(file,buffercomp,size))
{
// Initialisation de la preview
Pre_load(context, 320,200,File_length_file(file),FORMAT_PC1,PIXEL_SIMPLE,4);
if (File_error==0)
{
// Initialisation de la palette
if (Config.Clear_palette)
memset(context->Palette,0,sizeof(T_Palette));
PI1_decode_palette(buffercomp+2,(byte *)context->Palette);
// Décompression du buffer
PC1_uncompress_packbits(buffercomp+34,bufferdecomp);
// Décodage de l'image
ptr=bufferdecomp;
for (y_pos=0;y_pos<200;y_pos++)
{
// Décodage de la scanline
PC1_4bp_to_1line(ptr,ptr+40,ptr+80,ptr+120,pixels);
ptr+=160;
// Chargement de la ligne
for (x_pos=0;x_pos<320;x_pos++)
Set_pixel(context, x_pos,y_pos,pixels[x_pos]);
}
if (!File_error)
{
PI1_load_ranges(context, buffercomp, size);
}
}
}
else
File_error=1;
free(bufferdecomp);
free(buffercomp);
buffercomp = bufferdecomp = NULL;
}
else
{
File_error=1;
free(bufferdecomp);
free(buffercomp);
buffercomp = bufferdecomp = NULL;
}
fclose(file);
}
else
File_error=1;
}
// -- Sauver un fichier au format PC1 ---------------------------------------
void Save_PC1(T_IO_Context * context)
{
FILE *file;
int size;
short x_pos,y_pos;
byte * buffercomp;
byte * bufferdecomp;
byte * ptr;
byte pixels[320];
File_error=0;
// Ouverture du fichier
if ((file=Open_file_write(context)))
{
setvbuf(file, NULL, _IOFBF, 64*1024);
// Allocation des buffers mémoire
bufferdecomp=(byte *)malloc(32000);
buffercomp =(byte *)malloc(64066);
// Codage de la résolution
buffercomp[0]=0x80;
buffercomp[1]=0x00;
// Codage de la palette
PI1_code_palette((byte *)context->Palette,buffercomp+2);
// Codage de l'image
ptr=bufferdecomp;
for (y_pos=0;y_pos<200;y_pos++)
{
// Codage de la ligne
memset(pixels,0,320);
if (y_pos<context->Height)
{
for (x_pos=0;(x_pos<320) && (x_pos<context->Width);x_pos++)
pixels[x_pos]=Get_pixel(context, x_pos,y_pos);
}
// Encodage de la scanline
PC1_1line_to_4bp(pixels,ptr,ptr+40,ptr+80,ptr+120);
ptr+=160;
}
// Compression du buffer
PC1_compress_packbits(bufferdecomp,buffercomp+34,32000,&size);
size += 34;
size += 32;
PI1_save_ranges(context, buffercomp,size);
if (Write_bytes(file,buffercomp,size))
{
fclose(file);
}
else // Error d'écriture (disque plein ou protégé)
{
fclose(file);
Remove_file(context);
File_error=1;
}
// Libération des buffers mémoire
free(bufferdecomp);
free(buffercomp);
buffercomp = bufferdecomp = NULL;
}
else
{
fclose(file);
Remove_file(context);
File_error=1;
}
}
//////////////////////////////////// NEO ////////////////////////////////////
void Test_NEO(T_IO_Context * context)
{
FILE *file; // Fichier du fichier
int size; // Taille du fichier
word resolution; // Résolution de l'image
File_error=1;
// Ouverture du fichier
if ((file=Open_file_read(context)))
{
// Vérification de la taille
size=File_length_file(file);
if ((size==32128))
{
// Flag word : toujours 0
if (Read_word_le(file,&resolution))
{
if (resolution == 0)
File_error = 0;
}
// Lecture et vérification de la résolution
if (Read_word_le(file,&resolution))
{
if (resolution==0 || resolution==1 || resolution==2)
File_error |= 0;
}
}
// Fermeture du fichier
fclose(file);
}
}
void Load_NEO(T_IO_Context * context)
{
FILE *file;
word x_pos,y_pos;
byte * buffer;
byte * ptr;
byte pixels[320];
File_error=0;
if ((file=Open_file_read(context)))
{
// allocation d'un buffer mémoire
buffer=(byte *)malloc(32128);
if (buffer!=NULL)
{
// Lecture du fichier dans le buffer
if (Read_bytes(file,buffer,32128))
{
// Initialisation de la preview
Pre_load(context, 320,200,File_length_file(file),FORMAT_NEO,PIXEL_SIMPLE,4);
if (File_error==0)
{
// Initialisation de la palette
if (Config.Clear_palette)
memset(context->Palette,0,sizeof(T_Palette));
// on saute la résolution et le flag, chacun 2 bits
PI1_decode_palette(buffer+4,(byte *)context->Palette);
// Chargement/décompression de l'image
ptr=buffer+128;
for (y_pos=0;y_pos<200;y_pos++)
{
for (x_pos=0;x_pos<(320>>4);x_pos++)
{
PI1_8b_to_16p(ptr,pixels+(x_pos<<4));
ptr+=8;
}
for (x_pos=0;x_pos<320;x_pos++)
Set_pixel(context, x_pos,y_pos,pixels[x_pos]);
}
}
}
else
File_error=1;
free(buffer);
buffer = NULL;
}
else
File_error=1;
fclose(file);
}
else
File_error=1;
}
void Save_NEO(T_IO_Context * context)
{
FILE *file;
short x_pos,y_pos;
byte * buffer;
byte * ptr;
byte pixels[320];
File_error=0;
// Ouverture du fichier
if ((file=Open_file_write(context)))
{
setvbuf(file, NULL, _IOFBF, 64*1024);
// allocation d'un buffer mémoire
buffer=(byte *)malloc(32128);
// Codage de la résolution
buffer[0]=0x00;
buffer[1]=0x00;
buffer[2]=0x00;
buffer[3]=0x00;
// Codage de la palette
PI1_code_palette((byte *)context->Palette,buffer+4);
// Codage de l'image
ptr=buffer+128;
for (y_pos=0;y_pos<200;y_pos++)
{
// Codage de la ligne
memset(pixels,0,320);
if (y_pos<context->Height)
{
for (x_pos=0;(x_pos<320) && (x_pos<context->Width);x_pos++)
pixels[x_pos]=Get_pixel(context, x_pos,y_pos);
}
for (x_pos=0;x_pos<(320>>4);x_pos++)
{
PI1_16p_to_8b(pixels+(x_pos<<4),ptr);
ptr+=8;
}
}
if (Write_bytes(file,buffer,32128))
{
fclose(file);
}
else // Error d'écriture (disque plein ou protégé)
{
fclose(file);
Remove_file(context);
File_error=1;
}
// Libération du buffer mémoire
free(buffer);
buffer = NULL;
}
else
{
fclose(file);
Remove_file(context);
File_error=1;
}
}
//////////////////////////////////// C64 ////////////////////////////////////
void Test_C64(T_IO_Context * context)
{
FILE* file;
long file_size;
file = Open_file_read(context);
if (file)
{
file_size = File_length_file(file);
switch (file_size)
{
// case 1000: // screen or color
// case 1002: // (screen or color) + loadaddr
case 8000: // raw bitmap
case 8002: // raw bitmap with loadaddr
case 9000: // bitmap + ScreenRAM
case 9002: // bitmap + ScreenRAM + loadaddr
case 10001: // multicolor
case 10003: // multicolor + loadaddr
case 17472: // FLI (BlackMail)
case 17474: // FLI (BlackMail) + loadaddr
case 10277: // multicolor CDU-Paint + loadaddr
File_error = 0;
break;
default: // then we don't know for now.
File_error = 1;
}
fclose (file);
}
else
{
File_error = 1;
}
}
void Load_C64_hires(T_IO_Context *context, byte *bitmap, byte *screen_ram)
{
int cx,cy,x,y,c[4],pixel,color;
for(cy=0; cy<25; cy++)
{
for(cx=0; cx<40; cx++)
{
c[0]=screen_ram[cy*40+cx]&15;
c[1]=screen_ram[cy*40+cx]>>4;
for(y=0; y<8; y++)
{
pixel=bitmap[cy*320+cx*8+y];
for(x=0; x<8; x++)
{
color=c[pixel&(1<<(7-x))?1:0];
Set_pixel(context, cx*8+x,cy*8+y,color);
}
}
}
}
}
void Load_C64_multi(T_IO_Context *context, byte *bitmap, byte *screen_ram, byte *color_ram, byte background)
{
int cx,cy,x,y,c[4],pixel,color;
c[0]=background&15;
for(cy=0; cy<25; cy++)
{
for(cx=0; cx<40; cx++)
{
c[1]=screen_ram[cy*40+cx]>>4;
c[2]=screen_ram[cy*40+cx]&15;
c[3]=color_ram[cy*40+cx]&15;
for(y=0; y<8; y++)
{
pixel=bitmap[cy*320+cx*8+y];
for(x=0; x<4; x++)
{
color=c[(pixel&3)];
pixel>>=2;
Set_pixel(context, cx*4+(3-x),cy*8+y,color);
}
}
}
}
}
void Load_C64_fli(T_IO_Context *context, byte *bitmap, byte *screen_ram, byte *color_ram, byte *background)
{
// Thanks to MagerValp for complement of specifications.
//
// background : length: 200 (+ padding 56)
// These are the BG colors for lines 0-199 (top to bottom)
// Low nybble: the color.
// High nybble: garbage. ignore it.
// color_ram : length: 1000 (+ padding 24)
// Color RAM. Contains one color per 4x8 block.
// There are 40x25 such blocks, arranged from top left to bottom
// right, starting in right direction. For each block there is one byte.
// Low nybble: the color.
// High nybble: garbage. ignore it.
// screen_ram : length: 8192
// Screen RAMs. The s is important.
// This is actually 8 blocks of 1000 bytes, each separated by a filler of
// 24 bytes. Each byte contains data for a 4x1 pixel group, and a complete
// block will contain 40x25 of them. 40 is from left to right, and 25 is from
// top to bottom, spacing them 8 lines apart.
// The second block start at y=1, the third block starts at y=2, etc...
// Each byte contains 2 colors that *can* be used by the 4x1 pixel group:
// Low nybble: Color 1
// High nybble: Color 2
//
// bitmap : length: 8000
// This is the final structure that refers to all others. It describes
// 160x200 pixels linearly, from top left to bottom right, starting in
// right direction. For each pixel, two bits say which color is displayed
// (So 4 pixels are described by the same byte)
// 00 Use the BG color of the current line (background[y])
// 01 Use the Color 2 from the current 4x8 block of Screen RAM
// ((screen_ram[y/8][x/4] & 0xF0) >> 8)
// 10 Use the Color 1 from the current 4x8 block of Screen RAM
// (screen_ram[y/8][x/4] & 0x0F)
// 11 Use the color from Color RAM
// (color_ram[y/8][x/4] & 0x0F)
//
int cx,cy,x,y,c[4];
for(y=0; y<200; y++)
{
for(x=0; x<160; x++)
{
Set_pixel(context, x,y,background[y]);
}
}
Set_loading_layer(context, 1);
for(cy=0; cy<25; cy++)
{
for(cx=0; cx<40; cx++)
{
c[3]=color_ram[cy*40+cx]&15;
for(y=0; y<8; y++)
{
for(x=0; x<4; x++)
{
Set_pixel(context, cx*4+(3-x),cy*8+y,c[3]);
}
}
}
}
Set_loading_layer(context, 2);
for(cy=0; cy<25; cy++)
{
for(cx=0; cx<40; cx++)
{
c[3]=color_ram[cy*40+cx]&15;
for(y=0; y<8; y++)
{
int pixel=bitmap[cy*320+cx*8+y];
c[0]=background[cy*8+y]&15;
c[1]=screen_ram[y*1024+cy*40+cx]>>4;
c[2]=screen_ram[y*1024+cy*40+cx]&15;
for(x=0; x<4; x++)
{
int color=c[(pixel&3)];
pixel>>=2;
Set_pixel(context, cx*4+(3-x),cy*8+y,color);
}
}
}
}
Set_loading_layer(context, 3);
for(y=0; y<200; y++)
{
for(x=0; x<160; x++)
{
Set_pixel(context, x,y,16);
}
}
}
void Load_C64(T_IO_Context * context)
{
FILE* file;
long file_size;
byte hasLoadAddr=0;
int loadFormat=0;
enum c64_format {F_hires,F_multi,F_bitmap,F_fli};
const char *c64_format_names[]={"Hires","Multicolor","Bitmap","FLI"};
// Palette from http://www.pepto.de/projects/colorvic/
static const byte pal[48]={
0x00, 0x00, 0x00,
0xFF, 0xFF, 0xFF,
0x68, 0x37, 0x2B,
0x70, 0xA4, 0xB2,
0x6F, 0x3D, 0x86,
0x58, 0x8D, 0x43,
0x35, 0x28, 0x79,
0xB8, 0xC7, 0x6F,
0x6F, 0x4F, 0x25,
0x43, 0x39, 0x00,
0x9A, 0x67, 0x59,
0x44, 0x44, 0x44,
0x6C, 0x6C, 0x6C,
0x9A, 0xD2, 0x84,
0x6C, 0x5E, 0xB5,
0x95, 0x95, 0x95};
byte *file_buffer;
byte *bitmap, *screen_ram, *color_ram=NULL, *background=NULL; // Only pointers to existing data
word width=320, height=200;
static byte dummy_screen[1000];
file = Open_file_read(context);
if (file)
{
File_error=0;
file_size = File_length_file(file);
// Check for known file sizes
switch (file_size)
{
case 8000: // raw bitmap
case 8002: // raw bitmap with loadaddr
case 9000: // bitmap + ScreenRAM
case 9002: // bitmap + ScreenRAM + loadaddr
case 10001: // multicolor
case 10003: // multicolor + loadaddr
case 10277: // multicolor CDU-Paint + loadaddr
case 17472: // FLI (BlackMail)
case 17474: // FLI (BlackMail) + loadaddr
break;
default:
File_error = 1;
fclose(file);
return;
}
// Load entire file in memory
file_buffer=(byte *)malloc(file_size);
if (!file_buffer)
{
File_error = 1;
fclose(file);
return;
}
if (!Read_bytes(file,file_buffer,file_size))
{
File_error = 1;
free(file_buffer);
fclose(file);
return;
}
fclose(file);
memset(dummy_screen,1,1000);
switch (file_size)
{
case 8000: // raw bitmap
hasLoadAddr=0;
loadFormat=F_bitmap;
bitmap=file_buffer+0; // length: 8000
screen_ram=dummy_screen;
break;
case 8002: // raw bitmap with loadaddr
hasLoadAddr=1;
loadFormat=F_bitmap;
bitmap=file_buffer+2; // length: 8000
screen_ram=dummy_screen;
break;
case 9000: // bitmap + ScreenRAM
hasLoadAddr=0;
loadFormat=F_hires;
bitmap=file_buffer+0; // length: 8000
screen_ram=file_buffer+8000; // length: 1000
break;
case 9002: // bitmap + ScreenRAM + loadaddr
hasLoadAddr=1;
loadFormat=F_hires;
bitmap=file_buffer+2; // length: 8000
screen_ram=file_buffer+8002; // length: 1000
break;
case 10001: // multicolor
hasLoadAddr=0;
loadFormat=F_multi;
context->Ratio = PIXEL_WIDE;
bitmap=file_buffer+0; // length: 8000
screen_ram=file_buffer+8000; // length: 1000
color_ram=file_buffer+9000; // length: 1000
background=file_buffer+10000; // only 1
break;
case 10003: // multicolor + loadaddr
hasLoadAddr=1;
loadFormat=F_multi;
context->Ratio = PIXEL_WIDE;
bitmap=file_buffer+2; // length: 8000
screen_ram=file_buffer+8002; // length: 1000
color_ram=file_buffer+9002; // length: 1000
background=file_buffer+10002; // only 1
break;
case 10277: // multicolor CDU-Paint + loadaddr
hasLoadAddr=1;
loadFormat=F_multi;
context->Ratio = PIXEL_WIDE;
// 273 bytes of display routine
bitmap=file_buffer+275; // length: 8000
screen_ram=file_buffer+8275; // length: 1000
color_ram=file_buffer+9275; // length: 1000
background=file_buffer+10275; // only 1
break;
case 17472: // FLI (BlackMail)
hasLoadAddr=0;
loadFormat=F_fli;
context->Ratio = PIXEL_WIDE;
background=file_buffer+0; // length: 200 (+ padding 56)
color_ram=file_buffer+256; // length: 1000 (+ padding 24)
screen_ram=file_buffer+1280; // length: 8192
bitmap=file_buffer+9472; // length: 8000
break;
case 17474: // FLI (BlackMail) + loadaddr
hasLoadAddr=1;
loadFormat=F_fli;
context->Ratio = PIXEL_WIDE;
background=file_buffer+2; // length: 200 (+ padding 56)
color_ram=file_buffer+258; // length: 1000 (+ padding 24)
screen_ram=file_buffer+1282; // length: 8192
bitmap=file_buffer+9474; // length: 8000
break;
default:
File_error = 1;
free(file_buffer);
return;
}
if (context->Ratio == PIXEL_WIDE)
width=160;
// Write detailed format in comment
strcpy(context->Comment, c64_format_names[loadFormat]);
if (hasLoadAddr)
{
// get load address
word load_addr;
load_addr = file_buffer[0] | (file_buffer[1] << 8);
sprintf(context->Comment+strlen(context->Comment),", load at $%4.4X",load_addr);
}
else
{
sprintf(context->Comment+strlen(context->Comment),", no addr");
}
Pre_load(context, width, height, file_size, FORMAT_C64, context->Ratio,0); // Do this as soon as you can
memcpy(context->Palette,pal,48); // this set the software palette for grafx2
// Transparent color "16" is a dark grey that is distinguishable
// from black, but darker than normal colors.
context->Palette[16].R=20;
context->Palette[16].G=20;
context->Palette[16].B=20;
context->Width = width ;
context->Height = height;
context->Transparent_color=16;
if(loadFormat==F_fli)
{
Load_C64_fli(context,bitmap,screen_ram,color_ram,background);
}
else
if(loadFormat==F_multi)
{
Load_C64_multi(context,bitmap,screen_ram,color_ram,*background);
}
else
{
Load_C64_hires(context,bitmap,screen_ram);
}
File_error = 0;
free(file_buffer);
}
else
File_error = 1;
}
int Save_C64_window(byte *saveWhat, byte *loadAddr)
{
int button;
unsigned int i;
T_Dropdown_button *what, *addr;
char * what_label[] = {
"All",
"Bitmap",
"Screen",
"Color"
};
char * address_label[] = {
"None",
"$2000",
"$4000",
"$6000",
"$8000",
"$A000",
"$C000",
"$E000"
};
Open_window(200,120,"c64 settings");
Window_set_normal_button(110,100,80,15,"Save",1,1,SDLK_RETURN); // 1
Window_set_normal_button(10,100,80,15,"Cancel",1,1,SDLK_ESCAPE); // 2
Print_in_window(13,18,"Data:",MC_Dark,MC_Light);
what=Window_set_dropdown_button(10,28,90,15,70,what_label[*saveWhat],1, 0, 1, LEFT_SIDE,0); // 3
Window_dropdown_clear_items(what);
for (i=0; i<sizeof(what_label)/sizeof(what_label[0]); i++)
Window_dropdown_add_item(what,i,what_label[i]);
Print_in_window(113,18,"Address:",MC_Dark,MC_Light);
addr=Window_set_dropdown_button(110,28,70,15,70,address_label[*loadAddr/32],1, 0, 1, LEFT_SIDE,0); // 4
Window_dropdown_clear_items(addr);
for (i=0; i<sizeof(address_label)/sizeof(address_label[0]); i++)
Window_dropdown_add_item(addr,i,address_label[i]);
Update_window_area(0,0,Window_width,Window_height);
Display_cursor();
do
{
button = Window_clicked_button();
switch(button)
{
case 3: // Save what
*saveWhat=Window_attribute2;
//printf("what=%d\n",Window_attribute2);
break;
case 4: // Load addr
*loadAddr=Window_attribute2*32;
//printf("addr=$%02x00 (%d)\n",loadAddr,Window_attribute2);
break;
case 0: break;
}
}while(button!=1 && button!=2);
Close_window();
Display_cursor();
return button==1;
}
int Save_C64_hires(T_IO_Context *context, byte saveWhat, byte loadAddr)
{
int cx,cy,x,y,c1,c2=0,i,pixel,bits,pos=0;
word numcolors;
dword cusage[256];
byte screen_ram[1000],bitmap[8000];
FILE *file;
for(x=0;x<1000;x++)screen_ram[x]=1; // init colormem to black/white
for(cy=0; cy<25; cy++) // Character line, 25 lines
{
for(cx=0; cx<40; cx++) // Character column, 40 columns
{
for(i=0;i<256;i++)
cusage[i]=0;
numcolors=Count_used_colors_area(cusage,cx*8,cy*8,8,8);
if (numcolors>2)
{
Warning_with_format("More than 2 colors\nin 8x8 pixel cell: (%d, %d)\nRect: (%d, %d, %d, %d)", cx, cy, cx * 8, cy * 8, cx * 8 + 7, cy * 8 + 7);
// TODO here we should hilite the offending block
return 1;
}
c1 = 0; c2 = 0;
for(i=0;i<16;i++)
{
if(cusage[i])
{
c2=i;
break;
}
}
c1=c2+1;
for(i=c2;i<16;i++)
{
if(cusage[i])
{
c1=i;
}
}
screen_ram[cx+cy*40]=(c2<<4)|c1;
for(y=0; y<8; y++)
{
bits=0;
for(x=0; x<8; x++)
{
pixel=Get_pixel(context, x+cx*8,y+cy*8);
if(pixel>15)
{
Warning_message("Color above 15 used");
// TODO hilite offending block here too?
// or make it smarter with color allocation?
// However, the palette is fixed to the 16 first colors
return 1;
}
bits=bits<<1;
if (pixel==c2) bits|=1;
}
bitmap[pos++]=bits;
//Write_byte(file,bits&255);
}
}
}
file = Open_file_write(context);
if(!file)
{
Warning_message("File open failed");
File_error = 1;
return 1;
}
setvbuf(file, NULL, _IOFBF, 64*1024);
if (loadAddr)
{
Write_byte(file,0);
Write_byte(file,loadAddr);
}
if (saveWhat==0 || saveWhat==1)
Write_bytes(file,bitmap,8000);
if (saveWhat==0 || saveWhat==2)
Write_bytes(file,screen_ram,1000);
fclose(file);
return 0;
}
int Save_C64_multi(T_IO_Context *context, byte saveWhat, byte loadAddr)
{
/*
BITS COLOR INFORMATION COMES FROM
00 Background color #0 (screen color)
01 Upper 4 bits of Screen RAM
10 Lower 4 bits of Screen RAM
11 Color RAM nybble (nybble = 1/2 byte = 4 bits)
*/
int cx,cy,x,y,c[4]={0,0,0,0},color,lut[16],bits,pixel,pos=0;
int cand,n,used;
word cols, candidates = 0, invalids = 0;
// FIXME allocating this on the stack is not a good idea. On some platforms
// the stack has a rather small size...
byte bitmap[8000],screen_ram[1000],color_ram[1000];
word numcolors;
dword cusage[256];
byte i,background=0;
FILE *file;
// Detect the ackground color the image should be using. It's the one that's
// used on all tiles having 4 colors.
for(y=0;y<200;y=y+8)
{
for (x = 0; x<160; x=x+4)
{
cols = 0;
// Compute the usage count of each color in the tile
for (cy=0;cy<8;cy++)
for (cx=0;cx<4;cx++)
{
pixel=Get_pixel(context, x+cx,y+cy);
cols |= (1 << pixel);
}
cand = 0;
used = 0;
// Count the number of used colors in the tile
for (n = 0; n<16; n++)
{
if (cols & (1 << pixel))
used++;
}
if (used>3)
{
// This is a tile that uses the background color (and 3 others)
// Try to guess which color is most likely the background one
for (n = 0; n<16; n++)
{
if ((cols & (1 << n)) && !((candidates | invalids) & (1 << n))) {
// This color was not used in any other tile yet,
// but it could be the background one.
candidates |= 1 << n;
}
if ((cols & 1 << n) == 0 ) {
// This color isn't used at all in this tile:
// Can't be the global
invalids |= 1 << n;
}
if (candidates & (1 << n)) {
// We have a candidate, mark it as such
cand++;
}
}
// After checking the constraints for this tile, do we have
// candidate background colors left ?
if (cand==0)
{
Warning_message("No possible global background color found");
return 1;
}
}
}
}
// Now just pick the first valid candidate
for (n = 0; n<16; n++)
{
if (candidates & (1 << n)) {
background = n;
break;
}
}
// Now that we know which color is the background, we can encode the cells
for(cy=0; cy<25; cy++)
{
//printf("\ny:%2d ",cy);
for(cx=0; cx<40; cx++)
{
numcolors=Count_used_colors_area(cusage,cx*4,cy*8,4,8);
if(numcolors>4)
{
Warning_with_format("More than 4 colors\nin 4x8 pixel cell: (%d, %d)\nRect: (%d, %d, %d, %d)", cx, cy, cx * 4, cy * 8, cx * 4 + 3, cy * 8 + 7);
// TODO hilite offending block
return 1;
}
color=1;
c[0]=background;
for(i=0; i<16; i++)
{
lut[i]=0;
if(cusage[i])
{
if(i!=background)
{
lut[i]=color;
c[color]=i;
color++;
}
else
{
lut[i]=0;
}
}
}
// add to screen_ram and color_ram
screen_ram[cx+cy*40]=c[1]<<4|c[2];
color_ram[cx+cy*40]=c[3];
//printf("%x%x%x ",c[1],c[2],c[3]);
for(y=0;y<8;y++)
{
bits=0;
for(x=0;x<4;x++)
{
pixel=Get_pixel(context, cx*4+x,cy*8+y);
if(pixel>15)
{
Warning_message("Color above 15 used");
// TODO hilite as in hires, you should stay to
// the fixed 16 color palette
return 1;
}
bits=bits<<2;
bits|=lut[pixel];
}
//Write_byte(file,bits&255);
bitmap[pos++]=bits;
}
}
}
file = Open_file_write(context);
if(!file)
{
Warning_message("File open failed");
File_error = 2;
return 2;
}
setvbuf(file, NULL, _IOFBF, 64*1024);
if (loadAddr)
{
Write_byte(file,0);
Write_byte(file,loadAddr);
}
if (saveWhat==0 || saveWhat==1)
Write_bytes(file,bitmap,8000);
if (saveWhat==0 || saveWhat==2)
Write_bytes(file,screen_ram,1000);
if (saveWhat==0 || saveWhat==3)
Write_bytes(file,color_ram,1000);
if (saveWhat==0)
Write_byte(file,background);
fclose(file);
//printf("\nbg:%d\n",background);
return 0;
}
int Save_C64_fli(T_IO_Context * context, byte saveWhat, byte loadAddr)
{
FILE *file;
byte file_buffer[17474];
memset(file_buffer,0,sizeof(file_buffer));
if (C64_FLI(file_buffer+9474, file_buffer+1282, file_buffer+258, file_buffer+2))
{
File_error=1;
return 1;
}
file = Open_file_write(context);
if(!file)
{
Warning_message("File open failed");
File_error = 1;
return 1;
}
setvbuf(file, NULL, _IOFBF, 64*1024);
if (loadAddr)
{
file_buffer[0]=0;
file_buffer[1]=loadAddr;
Write_bytes(file,file_buffer,2);
}
if (saveWhat==0)
Write_bytes(file,file_buffer+2,256);
if (saveWhat==0 || saveWhat==3)
Write_bytes(file,file_buffer+258,1024);
if (saveWhat==0 || saveWhat==1)
Write_bytes(file,file_buffer+1282,8192);
if (saveWhat==0 || saveWhat==2)
Write_bytes(file,file_buffer+9474,8000);
fclose(file);
//printf("\nbg:%d\n",background);
return 0;
}
void Save_C64(T_IO_Context * context)
{
static byte saveWhat=0, loadAddr=0;
if (((context->Width!=320) && (context->Width!=160)) || context->Height!=200)
{
Warning_message("must be 320x200 or 160x200");
File_error = 1;
return;
}
if(!Save_C64_window(&saveWhat,&loadAddr))
{
File_error = 1;
return;
}
if (strcasecmp(context->File_name + strlen(context->File_name) - 4, ".fli") == 0)
{
// FIXME moving FLI to a separate format in the fileselector would be smarter
File_error = Save_C64_fli(context, saveWhat, loadAddr);
} else if (context->Width==320)
File_error = Save_C64_hires(context, saveWhat, loadAddr);
else {
File_error = Save_C64_multi(context, saveWhat, loadAddr);
}
}
// SCR (Amstrad CPC)
void Test_SCR(T_IO_Context * context)
{
// Mmh... not sure what we could test. Any idea ?
// The palette file can be tested, if it exists and have the right size it's
// ok. But if it's not there the pixel data may still be valid. And we can't
// use the filesize as this depends on the screen format.
// An AMSDOS header would be a good indication but in some cases it may not
// be there
(void)context; // unused
}
void Load_SCR(T_IO_Context * context)
{
// The Amstrad CPC screen memory is mapped in a weird mode, somewhere
// between bitmap and textmode. Basically the only way to decode this is to
// emulate the video chip and read the bytes as needed...
// Moreover, the hardware allows the screen to have any size from 8x1 to
// 800x273 pixels, and there is no indication of that in the file besides
// its size. It can also use any of the 3 screen modes. Fortunately this
// last bit of information is stored in the palette file.
// Oh, and BTW, the picture can be offset, and it's even usual to do it,
// because letting 128 pixels unused at the beginning of the file make it a
// lot easier to handle screens using more than 16K of VRam.
// The pixel encoding change with the video mode so we have to know that
// before attempting to load anything...
// As if this wasn't enough, Advanced OCP Art Studio, the reference tool on
// Amstrad, can use RLE packing when saving files, meaning we also have to
// handle that.
// All this mess enforces us to load (and unpack if needed) the file to a
// temporary 32k buffer before actually decoding it.
// 1) Seek for a palette
// 2) If palette found get screenmode from there, else ask user
// 3) ask user for screen size (or register values)
// 4) Load color data from palette (if found)
// 5) Close palette
// 6) Open the file
// 7) Run around the screen to untangle the pixeldata
// 8) Close the file
(void)context; // unused
}
void Save_SCR(T_IO_Context * context)
{
// TODO : Add possibility to set R9, R12, R13 values
// TODO : Add OCP packing support
// TODO : Add possibility to include AMSDOS header, with proper loading
// address guessed from r12/r13 values.
unsigned char* output;
unsigned long outsize;
unsigned char r1;
int cpc_mode;
FILE* file;
switch(Pixel_ratio)
{
case PIXEL_WIDE:
case PIXEL_WIDE2:
cpc_mode = 0;
break;
case PIXEL_TALL:
case PIXEL_TALL2:
case PIXEL_TALL3:
cpc_mode = 2;
break;
default:
cpc_mode = 1;
break;
}
output = raw2crtc(context, cpc_mode, 7, &outsize, &r1, 0x0C, 0);
file = Open_file_write(context);
Write_bytes(file, output, outsize);
fclose(file);
free (output);
output = NULL;
File_error = 0;
}
// CM5 - Amstrad CPC "Mode 5" picture
// This is a format designed by SyX. There is one .GFX file in the usual amstrad format,
// and a .CM5 file with the palette, which varies over time.
void Test_CM5(T_IO_Context * context)
{
// check cm5 file size == 2049 bytes
FILE *file;
long file_size;
File_error = 1;
file = Open_file_read(context);
if (file == NULL)
return;
file_size = File_length_file(file);
fclose(file);
if (file_size != 2049)
return;
// check existence of a .GFX file with the same name
file = Open_file_read_with_alternate_ext(context, "gfx");
if (file == NULL)
return;
file_size = File_length_file(file);
fclose(file);
if (file_size != 18432)
return;
File_error = 0;
}
void Load_CM5(T_IO_Context* context)
{
// Ensure "8bit" constraint mode is switched on
// Set palette to the CPC hardware colors
// Load the palette data to the 4 colorlayers
FILE *file;
byte value = 0;
int mod=0;
short line = 0;
int tx, ty;
static const T_Components CPC_Hw_Palette[] = {
{0x6E, 0x7D, 0x6B}, // 0x40
{0x6E, 0x7B, 0x6B}, // 0x41
{0, 0xF3, 0x6B},
{0xF3, 0xF3, 0x6D},
{0, 2, 0x6B},
{0xF0, 2, 0x68},
{0, 0x78, 0x68},
{0xF3, 0x7D, 0x6B},
{0xF3, 0x02, 0x68}, // 0x48
{0xF3, 0xF3, 0x6B},
{0xF3, 0xF3, 0xD},
{255, 0xF3, 0xF9},
{0xF3, 5, 6},
{0xF3, 2, 0xF4},
{0xF3, 0x7D, 0xD},
{0xFA, 0x80, 0xF9},
{0x00, 0x02, 0x68}, // 0x50
{0x02, 0xF3, 0x6B},
{2, 0xF0, 1},
{0xF, 0xF3, 0xF2},
{0, 2, 1},
{0x0C, 2, 0xF4},
{2, 0x78, 1},
{0xC, 0x7B, 0xF4},
{0x69, 2, 0x68}, // 0x58
{0x71, 0xF3, 0x6B},
{0x71, 0xF5, 4},
{0x71, 0xF3, 0xF4},
{0x6C, 2, 1},
{0x6C, 2, 0xF2},
{0x6E, 0x7B, 1},
{0x6E, 0x7B, 0xF6}
};
// for preview :
byte ink0;
byte ink1[256];
byte ink2[256];
byte ink3[256*6];
if (!(file = Open_file_read(context)))
{
File_error = 1;
return;
}
Pre_load(context, 48*6, 256, 2049, FORMAT_CM5, PIXEL_SIMPLE, 0);
if (Config.Clear_palette)
memset(context->Palette,0,sizeof(T_Palette));
// Setup the palette (amstrad hardware palette)
memcpy(context->Palette + 0x40, CPC_Hw_Palette, sizeof(CPC_Hw_Palette));
if (!Read_byte(file, &ink0))
File_error = 2;
// This forces the creation of 5 layers total :
// Needed because the "pixel" functions will seek layer 4
Set_loading_layer(context, 4);
// Now select layer 1 again
Set_loading_layer(context, 0);
if (context->Type == CONTEXT_MAIN_IMAGE)
{
Main.backups->Pages->Image_mode = IMAGE_MODE_MODE5;
// Fill layer with color we just read (Layer 1 - INK 0)
for(ty=0; ty<context->Height; ty++)
for(tx=0; tx<context->Width; tx++)
Set_pixel(context, tx, ty, ink0);
}
while(Read_byte(file, &value))
{
switch(mod)
{
case 0:
// This is color for layer 2 - INK 1
Set_loading_layer(context, 1);
for(tx=0; tx<context->Width; tx++)
Set_pixel(context, tx, line, value);
ink1[line] = value;
break;
case 1:
// This is color for layer 3 - INK 2
Set_loading_layer(context, 2);
for(tx=0; tx<context->Width; tx++)
Set_pixel(context, tx, line, value);
ink2[line] = value;
break;
default:
// This is color for a block in layer 4 - INK 3
Set_loading_layer(context, 3);
for(tx=(mod-2)*48; tx<(mod-1)*48; tx++)
Set_pixel(context, tx, line, value);
ink3[line*6+(mod-2)] = value;
break;
}
mod++;
if (mod > 7)
{
mod = 0;
line++;
}
}
fclose(file);
// Load the pixeldata to the 5th layer
file = Open_file_read_with_alternate_ext(context, "gfx");
if (file == NULL)
{
File_error = 1;
return;
}
Set_loading_layer(context, 4);
if (context->Type == CONTEXT_PREVIEW)
for (ty = 0; ty < 256; ty++)
for (tx = 0; tx < 48*6; )
{
Read_byte(file, &value);
for (mod = 0; mod < 4; mod++, tx++, value <<= 1)
{
switch(3 ^ (((value&0x80) >> 7) | ((value&0x8)>>2))) // INK
{
case 0:
Set_pixel(context, tx, ty, ink0);
break;
case 1:
Set_pixel(context, tx, ty, ink1[ty]);
break;
case 2:
Set_pixel(context, tx, ty, ink2[ty]);
break;
default:
Set_pixel(context, tx, ty, ink3[ty*6+(tx/48)]);
}
}
}
else
for (ty = 0; ty < 256; ty++)
for (tx = 0; tx < 48*6; )
{
Read_byte(file, &value);
Set_pixel(context, tx++, ty, 3 ^ (((value&0x80) >> 7) | ((value&0x8)>>2)));
Set_pixel(context, tx++, ty, 3 ^ (((value&0x40) >> 6) | ((value&0x4)>>1)));
Set_pixel(context, tx++, ty, 3 ^ (((value&0x20) >> 5) | ((value&0x2)>>0)));
Set_pixel(context, tx++, ty, 3 ^ (((value&0x10) >> 4) | ((value&0x1)<<1)));
}
fclose(file);
}
void Save_CM5(T_IO_Context* context)
{
FILE* file;
int tx, ty;
// TODO: Check picture has 5 layers
// TODO: Check the constraints on the layers
// Layer 1 : 1 color Only
// Layer 2 and 3 : 1 color/line
// Layer 4 : 1 color / 48x1 block
// TODO: handle filesize
if (!(file = Open_file_write(context)))
{
File_error = 1;
return;
}
setvbuf(file, NULL, _IOFBF, 64*1024);
// Write layer 0
Set_saving_layer(context, 0);
Write_byte(file, Get_pixel(context, 0, 0));
for(ty = 0; ty < 256; ty++)
{
Set_saving_layer(context, 1);
Write_byte(file, Get_pixel(context, 0, ty));
Set_saving_layer(context, 2);
Write_byte(file, Get_pixel(context, 0, ty));
Set_saving_layer(context, 3);
for(tx = 0; tx < 6; tx++)
{
Write_byte(file, Get_pixel(context, tx*48, ty));
}
}
fclose(file);
// Now the pixeldata
if (!(file = Open_file_write_with_alternate_ext(context, "gfx")))
{
File_error = 2;
return;
}
setvbuf(file, NULL, _IOFBF, 64*1024);
Set_saving_layer(context, 4);
for (ty = 0; ty < 256; ty++)
{
for (tx = 0; tx < 48*6; tx+=4)
{
byte code = 0;
byte pixel;
pixel = 3-Get_pixel(context, tx+3, ty);
code |= (pixel&2)>>1 | ((pixel & 1)<<4);
pixel = 3-Get_pixel(context, tx+2, ty);
code |= ((pixel&2)<<0) | ((pixel & 1)<<5);
pixel = 3-Get_pixel(context, tx+1, ty);
code |= ((pixel&2)<<1) | ((pixel & 1)<<6);
pixel = 3-Get_pixel(context, tx, ty);
code |= ((pixel&2)<<2) | ((pixel & 1)<<7);
Write_byte(file, code);
}
}
fclose(file);
File_error = 0;
}
/* Amstrad CPC 'PPH' for Perfect Pix.
// This is a format designed by Rhino.
// There are 3 modes:
// - Mode 'R': 1:1 pixels, 16 colors from the CPC 27 color palette.
// (this is implemented on CPC as two pictures with wide pixels, the "odd" one
// being shifted half a pixel to the right), and flipping)
// - Mode 'B0': wide pixels, up to 126 out of 378 colors.
// (this is implemented as two pictures with wide pixels, sharing the same 16
// color palette, and flipping)
// - Mode 'B1': 1:1 pixels, 1 fixed color, up to 34 palettes of 9 colors
// (actually 4 colors + flipping)
//
// - The standard CPC formats can also be encapsulated into a PPH file.
*/
void Test_PPH(T_IO_Context * context)
{
FILE *file;
byte buffer[6];
unsigned long file_size;
unsigned int w, h;
unsigned int expected;
File_error = 1;
file = Open_file_read(context);
if (file == NULL)
return;
// First check file size is large enough to hold the header
file_size = File_length_file(file);
if (file_size < 11) {
File_error = 1;
goto abort;
}
// File is large enough for the header, now check if the data makes some sense
if (!Read_bytes(file, buffer, 6))
goto abort;
if (buffer[0] > 5) {
// Unknown mode
File_error = 2;
goto abort;
}
w = buffer[1] | (buffer[2] << 8);
if (w < 2 || w > 384) {
// Invalid width
File_error = 3;
goto abort;
}
h = buffer[3] | (buffer[4] << 8);
if (h < 1 || h > 272) {
// Invalid height
File_error = 4;
goto abort;
}
if (buffer[5] < 1 || buffer[5] > 28)
{
// Invalid palettes count
File_error = 5;
goto abort;
}
expected = 6; // Size of header
switch(buffer[0])
{
case 0:
case 3:
case 4:
// Palette size should be 16 bytes, only 1 palette.
if (buffer[5] != 1) {
File_error = 7;
goto abort;
}
expected += 16;
break;
case 1:
case 5:
expected += buffer[5] * 5 - 1;
break;
case 2:
// Palette size should be 2 bytes
if (buffer[5] != 1) {
File_error = 7;
goto abort;
}
expected += 2;
break;
}
if (file_size != expected)
{
File_error = 6;
goto abort;
}
fclose (file);
// check existence of .ODD/.EVE files with the same name
// and the right size
expected = w * h / 4;
file = Open_file_read_with_alternate_ext(context, "odd");
if (file == NULL)
goto abort;
file_size = File_length_file(file);
fclose (file);
file = Open_file_read_with_alternate_ext(context, "eve");
if (file == NULL)
goto abort;
if (file_size != File_length_file(file) || file_size != expected)
{
File_error = 8;
goto abort;
}
File_error = 0;
abort:
if (file != NULL)
fclose(file);
}
static uint8_t pph_blend(uint8_t a, uint8_t b)
{
uint32_t h,l;
if (a > b) { h = a; l = b; }
else { h = b; l = a; }
return (23 * h + 9 * l) / 32;
}
void Load_PPH(T_IO_Context* context)
{
FILE *file;
FILE *feven;
// Read in the header
uint8_t mode;
uint16_t width;
uint16_t height;
uint8_t npal;
int i,j;
uint8_t a,b,c,d;
int file_size;
uint8_t pl[16];
static const T_Components CPCPAL[27] =
{
{ 0x00, 0x02, 0x01 }, { 0x00, 0x02, 0x6B }, { 0x0C, 0x02, 0xF4 },
{ 0x6C, 0x02, 0x01 }, { 0x69, 0x02, 0x68 }, { 0x6C, 0x02, 0xF2 },
{ 0xF3, 0x05, 0x06 }, { 0xF0, 0x02, 0x68 }, { 0xF3, 0x02, 0xF4 },
{ 0x02, 0x78, 0x01 }, { 0x00, 0x78, 0x68 }, { 0x0C, 0x7B, 0xF4 },
{ 0x6E, 0x7B, 0x01 }, { 0x6E, 0x7D, 0x6B }, { 0x6E, 0x7B, 0xF6 },
{ 0xF3, 0x7D, 0x0D }, { 0xF3, 0x7D, 0x6B }, { 0xFA, 0x80, 0xF9 },
{ 0x02, 0xF0, 0x01 }, { 0x00, 0xF3, 0x6B }, { 0x0F, 0xF3, 0xF2 },
{ 0x71, 0xF5, 0x04 }, { 0x71, 0xF3, 0x6B }, { 0x71, 0xF3, 0xF4 },
{ 0xF3, 0xF3, 0x0D }, { 0xF3, 0xF3, 0x6D }, { 0xFF, 0xF3, 0xF9 }
};
if (!(file = Open_file_read(context)))
{
File_error = 1;
return;
}
file_size=File_length_file(file);
Read_byte(file, &mode);
Read_word_le(file, &width);
Read_word_le(file, &height);
Read_byte(file, &npal);
if (npal > 16)
npal = 16;
// Switch to the proper aspect ratio
switch (mode)
{
case 0:
case 4:
context->Ratio = PIXEL_WIDE;
width /= 2;
break;
case 2:
context->Ratio = PIXEL_TALL;
break;
case 1:
case 5:
case 3:
context->Ratio = PIXEL_SIMPLE;
break;
}
Pre_load(context, width, height, file_size, FORMAT_PPH, context->Ratio, 0);
context->Width = width;
context->Height = height;
// First of all, detect the mode
// 0, 1, 2 > Load as with SCR files?
// R(3) > Load as single layer, square pixels, 16 colors
// B0(4) > Load as single layer, wide pixels, expand palette with colorcycling
// B1(5) > Load as ???
// Maybe special mode similar to mode5, with 2 layers + auto-flicker?
switch (mode)
{
case 0:
case 3: // R
// 16-color palette
for (i = 0; i < 16; i++)
{
uint8_t color;
Read_byte(file, &color);
context->Palette[i] = CPCPAL[color];
}
break;
case 1:
case 5: // B1
{
// Single or multiple 4-color palettes
uint8_t base[4];
for (j = 0; j < npal; j++)
{
for (i = 0; i < 4; i++)
{
Read_byte(file,&base[i]);
}
for (i = 0; i < 16; i++)
{
context->Palette[i + 16*j].R = pph_blend(
CPCPAL[base[i & 3]].R, CPCPAL[base[i >> 2]].R);
context->Palette[i + 16*j].G = pph_blend(
CPCPAL[base[i & 3]].G, CPCPAL[base[i >> 2]].G);
context->Palette[i + 16*j].B = pph_blend(
CPCPAL[base[i & 3]].B, CPCPAL[base[i >> 2]].B);
}
// TODO this byte marks where this palette stops being used and the
// next starts. We must handle this!
Read_byte(file,&pl[j]);
}
pl[npal - 1] = 255;
break;
}
case 2:
// Single 2-color palette
break;
case 4: // B0
{
// Single 16-color palette + flipping, need to expand palette and
// setup colorcycling ranges.
uint8_t base[16];
for (i = 0; i < 16; i++)
{
Read_byte(file,&base[i]);
}
for (i = 0; i < 256; i++)
{
context->Palette[i].R = pph_blend(
CPCPAL[base[i & 15]].R, CPCPAL[base[i >> 4]].R);
context->Palette[i].G = pph_blend(
CPCPAL[base[i & 15]].G, CPCPAL[base[i >> 4]].G);
context->Palette[i].B = pph_blend(
CPCPAL[base[i & 15]].B, CPCPAL[base[i >> 4]].B);
}
}
break;
}
fclose(file);
// Load the picture data
// There are two pages, each storing bytes in the CPC vram format but lines in
// linear order.
file = Open_file_read_with_alternate_ext(context, "odd");
if (file == NULL)
{
File_error = 3;
return;
}
feven = Open_file_read_with_alternate_ext(context, "eve");
if (feven == NULL)
{
File_error = 4;
fclose(file);
return;
}
c = 0;
d = 0;
for (j = 0; j < height; j++)
{
for (i = 0; i < width;)
{
uint8_t even, odd;
Read_byte(feven, &even);
Read_byte(file, &odd);
switch (mode)
{
case 4:
a = ((even & 0x02) << 2) | ((even & 0x08) >> 2)
| ((even & 0x20) >> 3) | ((even & 0x80) >> 7);
a <<= 4;
a |= ((odd & 0x02) << 2) | (( odd & 0x08) >> 2)
| (( odd & 0x20) >> 3) | (( odd & 0x80) >> 7);
b = ((even & 0x01) << 3) | ((even & 0x04) >> 1)
| ((even & 0x10) >> 2) | ((even & 0x40) >> 6);
b <<= 4;
b |= ((odd & 0x01) << 3) | (( odd & 0x04) >> 1)
| (( odd & 0x10) >> 2) | (( odd & 0x40) >> 6);
Set_pixel(context, i++, j, a);
Set_pixel(context, i++, j, b);
break;
case 3:
a = ((even & 0x02) << 2) | ((even & 0x08) >> 2)
| ((even & 0x20) >> 3) | ((even & 0x80) >> 7);
b = (( odd & 0x02) << 2) | (( odd & 0x08) >> 2)
| (( odd & 0x20) >> 3) | (( odd & 0x80) >> 7);
c = ((even & 0x01) << 3) | ((even & 0x04) >> 1)
| ((even & 0x10) >> 2) | ((even & 0x40) >> 6);
d = (( odd & 0x01) << 3) | (( odd & 0x04) >> 1)
| (( odd & 0x10) >> 2) | (( odd & 0x40) >> 6);
Set_pixel(context, i++, j, j & 1 ? b : a);
Set_pixel(context, i++, j, j & 1 ? a : b);
Set_pixel(context, i++, j, j & 1 ? d : c);
Set_pixel(context, i++, j, j & 1 ? c : d);
break;
case 5:
if (d >= pl[c])
{
d = 0;
c++;
}
a = ((even & 0x80) >> 6) | ((even & 0x08) >> 3);
b = (( odd & 0x80) >> 6) | (( odd & 0x08) >> 3);
Set_pixel(context, i++, j, a + (b << 2) + c * 16);
a = ((even & 0x40) >> 5) | ((even & 0x04) >> 2);
b = (( odd & 0x40) >> 5) | (( odd & 0x04) >> 2);
Set_pixel(context, i++, j, a + (b << 2) + c * 16);
a = ((even & 0x20) >> 4) | ((even & 0x02) >> 1);
b = (( odd & 0x20) >> 4) | (( odd & 0x02) >> 1);
Set_pixel(context, i++, j, a + (b << 2) + c * 16);
a = ((even & 0x10) >> 3) | ((even & 0x01) >> 0);
b = (( odd & 0x10) >> 3) | (( odd & 0x01) >> 0);
Set_pixel(context, i++, j, a + (b << 2) + c * 16);
break;
default:
File_error = 2;
return;
}
}
d++;
}
fclose(file);
fclose(feven);
File_error = 0;
}
void Save_PPH(T_IO_Context* context)
{
(void)context; // unused
// TODO
// Detect mode
// Wide pixels => B0 (4)
// Square pixels:
// - 16 colors used => R
// - more colors used => B1 (if <16 colors per line)
// Check palette
// B0: use diagonal: 0, 17, 34, ... (assume the other are mixes)
// R: use 16 used colors (or 16 first?)
// B1: find the 16 colors used in a line? Or assume they are in-order already?
}
Reference in New Issue View Git Blame Copy Permalink